View source for Talk:TUT:snmpget

Hello.  In the Failed Requests section, it has no entry for timeouts.

  snmpget -v 1 -c demopublic test.net-snmp.org SNMPv2-MIB::sysUpTime.0
  Timeout: No Response from test.net-snmp.org.

This is my response for the first example.  I'm a new user to SNMP and have spent four hours with various SNMP agents and browsers with no results, just errors and timeouts.

[[User:Designatevoid|Designatevoid]] 20:46, 20 October 2007 (PDT)

If this doesn't work you may be behind a firewall that blocks the responses from the internet.<BR>
Try this<BR>
If you are within a network with a DHCP router, start a command prompt and issue an ipconfig dos command<br>
it should respond something like this<br>
<br>
Ethernet adapter Local Area Connection 1:<br>
<br>
        Connection-specific DNS Suffix  . : jollyroger.internal<br>
        IP Address. . . . . . . . . . . . : 134.171.264.60<br>
        Subnet Mask . . . . . . . . . . . : 255.255.248.0<br>
        Default Gateway . . . . . . . . . : 134.171.264.1<br>
<br>
Try snmpget -v 1 -c public 134.171.264.1 SNMPv2-MIB::sysUpTime.0<BR>

== How could it work? ==

Do you really suppose every firewall has snmp service?

I want to know how to use this commands on my localhost...