Difference between revisions of "DTLS Implementation Notes"

Revision as of 21:45, 8 January 2009

This page documents the experience of implementing SNMP over DTLS as described by documents being developed for the ISMS working group. A large section of this is relevant only to SNMP developers (Net-SNMP or otherwise) and some of this is relevant to anyone who is implementing a DTLS solution using OpenSSL. In particular, there are a number of tricks that need to be employed to make OpenSSL properly handle multiple clients. The implementation and this document were done by Wes Hardaker

Net-SNMP Background

Net-SNMP implements the transports over which SNMP messages can be sent using a pluggable architecture. This architecture defines hooks that allow implemented transports to handle opening, sending and receiving packets through "something or other".

To implement DTLS support within Net-SNMP a new transport had to be written that was responsible for sending and receiving packets. This new file (snmplib/snmpDTLSUDPDomain.c), though not yet checked into the SVN repository as of the time of this writing, is functional and has passed a number of tests. It should hopefully be ready for release by the Net-SNMP 5.5 release.

OpenSSL Background

OpenSSL's internal implementation architecture is well designed from a modular point of view. To some extent, however, this will come back to bite us as we'll see later on.

TLS/DTLS

Internally the TLS and DTLS implementations merely process the data they receive through "anything" and send responses back through the configured mechanism. These sending and receiving mechanisms are entirely separated from the TLS/DTLS implementations by a modular data sending and receiving framework called BIOs.

BIOs

BIOs in OpenSSL are merely code that knows how to send and receive data. You could easily think of them as a buffering layer between a data producer and consumer and where-ever-the-data-needs-to-go. They act in a very similar fashion to the way transports separate the Net-SNMP packet processing from the sending/receiving framework.

BIOs exist in OpenSSL to handle sending and receiving from many different directions. Probably the most common BIO is the one that attaches to a network socket like the TCP BIO. There are also BIOs that wrap around stdout, and there are memory BIOs that merely store data in a buffer. Starting with some version of OpenSSL there also was a datagram BIO that was designed to be used with DTLS and UDP. The datagram BIO is merely a wrapper around UDP sockets in the same way that the TCP BIO wrapped around TCP sockets.

TCP vs UDP Background

There is a fundamental difference, of course, between how UDP and TCP works. The biggest difference is in receiving packets. Normally for TCP you have to call accept() to allow a new connection to come through and get a new OS socket for sending and receiving on that socket to that peer. You have no idea yet how important that last statement is, so let me repeat it. In bold. TCP implementations provide consumers with one socket per connection.

Within the OpenSSL framework, when a new connection is requested from a new client the OpenSSL stack also creates a new BIO which is then attached to the new socket.

With UDP there is only one socket available to send and receive from (well, you could create multiple sockets with a different socket per client using a different UDP port per socket but you'd have to convince all your clients to send the traffic to the newly opened port just for them... In fact this is sort of what FTP does). With UDP a receiving server needs to check each packet that it's getting data from for the source address. Then if it needs to respond to the packet it needs to make sure that it remembers the address so it can send the response back to the right place. (TCP implementations, on the other hand remember it for you so there is less to do).

OpenSSL Context Background

OpenSSL needs to keep state with respect to ever TLS or DTLS session that it has established. It does this through the use of a SSL * pointer which is then attached to the sending and receiving BIO * pointer using a call as follows:

         SSL_set_bio(SSL *ptr, BIO *read_from_bio, BIO *write_to_bio);

Then, whenever stuff needs to be done (be it sending data or negotiating cryptography) the internal TLS implementation, when operating on traffic or data being sent in the context of the ptr function can simply send and receive traffic destined for it using the two "tied" BIOs. Normally, as I mentioned earlier, these BIOs are wrappers around TCP sockets for use with TLS. But wait, there's more...

Where the problem comes in