|
|
Line 56: |
Line 56: |
| ==== Matching SNMPv2 OIDs ==== | | ==== Matching SNMPv2 OIDs ==== |
| SNMPv2 traps and informs are much easier, because they include the correct OID in the SNMPv2-MIB::snmpTrapOID.0 variable in the trap. | | SNMPv2 traps and informs are much easier, because they include the correct OID in the SNMPv2-MIB::snmpTrapOID.0 variable in the trap. |
− |
| |
− | -- **************************************************************************
| |
− | --
| |
− | -- $Id: MBG-LANTIME-MIB.mib 1.3 2006/08/24 13:07:55 heiko TRASH $
| |
− | -- $Name: $
| |
− | --
| |
− | -- Copyright (c) Meinberg Funkuhren, 31812 Bad Pyrmont, Germany
| |
− | --
| |
− | -- Description:
| |
− | -- Management Information Base for Meinberg LANTIME time server
| |
− | --
| |
− | -- **************************************************************************
| |
− | --
| |
− | -- $Log: MBG-LANTIME-MIB.mib $
| |
− | -- Revision 1.3 2006/08/24 13:07:55 heiko
| |
− | -- - now up to 7 external NTP servers
| |
− | -- - "prefer" flag can be set for each external NTP server
| |
− | -- - renumbered the remaining objects in mbgLtCfgNtp
| |
− | -- Revision 1.2 2006/08/23 09:51:05 heiko
| |
− | -- - new object mbgLtCmdSetRefTime for setting the time of the refclock via SNMP
| |
− | -- Revision 1.1 2006/08/23 09:35:41 heiko
| |
− | --
| |
− | -- **************************************************************************
| |
− |
| |
− | MBG-SNMP-MIB DEFINITIONS ::= BEGIN
| |
− |
| |
− |
| |
− | IMPORTS
| |
− | MODULE-IDENTITY, OBJECT-TYPE , Integer32, NOTIFICATION-TYPE, enterprises
| |
− | FROM SNMPv2-SMI
| |
− | MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
| |
− | FROM SNMPv2-CONF
| |
− | DisplayString FROM SNMPv2-TC;
| |
− |
| |
− | mbgSnmp MODULE-IDENTITY
| |
− | LAST-UPDATED "200608230000Z"
| |
− | ORGANIZATION "www.meinberg.de"
| |
− | CONTACT-INFO
| |
− | "postal: Meinberg Funkuhren
| |
− | Lange Wand 9
| |
− | 31812 Bad Pyrmont
| |
− | Germany
| |
− |
| |
− | email: info@meinberg.de"
| |
− | DESCRIPTION
| |
− | " Management Information Base for Meinberg LANTIME time server"
| |
− | REVISION "200806150000Z"
| |
− | DESCRIPTION
| |
− | "Revised edition (V5.25), changed postal address"
| |
− | REVISION "200608230000Z"
| |
− | DESCRIPTION
| |
− | "Revised edition (V4.38), added mbgLtCmdSetRefTime"
| |
− | REVISION "200603200000Z"
| |
− | DESCRIPTION
| |
− | "Revised edition (V4.36) with changed Trap OID base"
| |
− | REVISION "200507080000Z"
| |
− | DESCRIPTION
| |
− | "Revised edition (V4.25)"
| |
− | ::= { enterprises 5597}
| |
− |
| |
− | mbgLantime OBJECT IDENTIFIER ::= { mbgSnmp 3 }
| |
− |
| |
− | --
| |
− | -- General LANTIME information objects
| |
− | --
| |
− |
| |
− | mbgLtInfo OBJECT IDENTIFIER ::= { mbgLantime 0 }
| |
− |
| |
− | mbgLtFirmwareVersion OBJECT-TYPE
| |
− | SYNTAX DisplayString
| |
− | MAX-ACCESS read-only
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "shows the installed firmware version of your LANTIME"
| |
− | ::= { mbgLtInfo 1 }
| |
− |
| |
− | mbgLtFirmwareVersionVal OBJECT-TYPE
| |
− | SYNTAX Integer32 (-2147483648..2147483647)
| |
− | MAX-ACCESS read-only
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "shows the installed firmware version of your LANTIME as an Integer32 value"
| |
− | ::= { mbgLtInfo 2 }
| |
− |
| |
− |
| |
− | --
| |
− | -- Lantime NTP states
| |
− | --
| |
− | mbgLtNtp OBJECT IDENTIFIER ::= { mbgLantime 1 }
| |
− |
| |
− |
| |
− |
| |
− | mbgLtNtpCurrentState OBJECT-TYPE
| |
− | SYNTAX DisplayString
| |
− | MAX-ACCESS read-only
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "actual state of the NTP as string"
| |
− | --- possible strings:
| |
− | --- "not synchronized"
| |
− | --- "no good refclock (->local)"
| |
− | --- "sync to external refclock"
| |
− | --- "sync to serial refclock"
| |
− | --- "Normal Operation (->PPS)"
| |
− | --- "Normal Operation (->internal refclock)"
| |
− | --- internal refclocks (PlugIn cards) have to be linked
| |
− | --- via /dev/refclock-2 and /dev/refclock-3
| |
− | ::= { mbgLtNtp 1 }
| |
− |
| |
− | mbgLtNtpCurrentStateVal OBJECT-TYPE
| |
− | SYNTAX INTEGER {
| |
− | notSynchronized(0),
| |
− | noGoodRefclock(1),
| |
− | syncToExtRefclock(2),
| |
− | syncToSerialRefclock(3),
| |
− | normalOperationPPS(4),
| |
− | normalOperationRefclock(5),
| |
− | unknown(99)
| |
− | }
| |
− |
| |
− | MAX-ACCESS read-only
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "current state of the NTP as integer value"
| |
− | --- "0 : not synchronized"
| |
− | --- "1 : no good refclock (->local)"
| |
− | --- "2 : sync to external refclock"
| |
− | --- "3 : sync to serial refclock"
| |
− | --- "4 : Normal Operation (->PPS)"
| |
− | --- "5 : Normal Operation (->internal refclock)"
| |
− | DEFVAL { 99 }
| |
− | ::= { mbgLtNtp 2 }
| |
− |
| |
− | mbgLtNtpStratum OBJECT-TYPE
| |
− | SYNTAX Integer32 (-2147483648..2147483647)
| |
− | MAX-ACCESS read-only
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "Stratum value of the NTP "
| |
− | DEFVAL { 99 }
| |
− | ::= { mbgLtNtp 3 }
| |
− |
| |
− | mbgLtNtpActiveRefclockId OBJECT-TYPE
| |
− | SYNTAX INTEGER {
| |
− | localClock(0),
| |
− | serialRefclock(1),
| |
− | pps(2),
| |
− | externalRefclock(3),
| |
− | notSync(99)
| |
− | }
| |
− |
| |
− | MAX-ACCESS read-only
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "Index of the current refclock selected by the NTP "
| |
− | --- "0 : local clock"
| |
− | --- "1 : serial refclock
| |
− | --- "2 : PPS (Lantime/RD: second serial refclock"
| |
− | --- "3 : external Refclock (Lantime/RD: PPS)
| |
− | --- "99: NTP has not sync to any refclock"
| |
− | DEFVAL { 99 }
| |
− | ::= { mbgLtNtp 4 }
| |
− |
| |
− | mbgLtNtpActiveRefclockName OBJECT-TYPE
| |
− | SYNTAX DisplayString
| |
− | MAX-ACCESS read-only
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "Name of the current refclock selected by the NTP "
| |
− | ::= { mbgLtNtp 5 }
| |
− |
| |
− | mbgLtNtpActiveRefclockOffset OBJECT-TYPE
| |
− | SYNTAX DisplayString
| |
− | MAX-ACCESS read-only
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "Time offset between the current selected refclock and time of NTP as string"
| |
− | ::= { mbgLtNtp 6 }
| |
− |
| |
− | mbgLtNtpActiveRefclockOffsetVal OBJECT-TYPE
| |
− | SYNTAX Integer32 (-2147483648..2147483647)
| |
− | MAX-ACCESS read-only
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "Time offset in micro seconds between the current selected refclock and time of NTP "
| |
− | DEFVAL { 1024000000 }
| |
− | ::= { mbgLtNtp 7 }
| |
− |
| |
− | mbgLtNtpNumberOfRefclocks OBJECT-TYPE
| |
− | SYNTAX Integer32 (-2147483648..2147483647)
| |
− | MAX-ACCESS read-only
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "Number of refclocks configured in the NTP "
| |
− | DEFVAL { 0 }
| |
− | ::= { mbgLtNtp 8 }
| |
− |
| |
− | mbgLtNtpAuthKeyId OBJECT-TYPE
| |
− | SYNTAX Integer32 (-2147483648..2147483647)
| |
− | MAX-ACCESS read-only
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "Authentication Key ID of active refclock is active "
| |
− | DEFVAL { 0 }
| |
− | ::= { mbgLtNtp 9 }
| |
− |
| |
− | mbgLtNtpVersion OBJECT-TYPE
| |
− | SYNTAX DisplayString
| |
− | MAX-ACCESS read-only
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "integrated NTP version "
| |
− | ::= { mbgLtNtp 10 }
| |
− |
| |
− |
| |
− | --
| |
− | -- Lantime Refclock states
| |
− | --
| |
− |
| |
− | mbgLtRefclock OBJECT IDENTIFIER ::= { mbgLantime 2 }
| |
− |
| |
− | mbgLtRefClockType OBJECT-TYPE
| |
− | SYNTAX DisplayString
| |
− | MAX-ACCESS read-only
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "Type of refclock connected to NTP time server "
| |
− | ::= { mbgLtRefclock 1 }
| |
− |
| |
− | mbgLtRefClockTypeVal OBJECT-TYPE
| |
− | SYNTAX INTEGER {
| |
− | notavailable(0),
| |
− | mbgGPS167(1),
| |
− | mbgGPS167BGTTGP(2),
| |
− | mbgPZF509(3),
| |
− | mbgPZF509BGTTGP(4),
| |
− | mbgSHS(5),
| |
− | mbgSHSBGT(6),
| |
− | mbgSHSFRC(7),
| |
− | mbgSHSFRCBGT(8),
| |
− | mbgTCR509(9),
| |
− | mbgTCR509BGTTGP(10),
| |
− | mbgRDT(11),
| |
− | mbgRDTBGTTGP(12),
| |
− | mbgEDT(13),
| |
− | mbgEDTBGTTGP(14),
| |
− | mbgAHS(15),
| |
− | mbgDHS(16),
| |
− | mbgNDT167(17),
| |
− | mbgNDT167BGT(18),
| |
− | mbgDCT(19),
| |
− | mbgDCTBGT(20),
| |
− | mbgSHSTCR(21),
| |
− | mbgSHSTCRBGT(22)
| |
− | }
| |
− |
| |
− | MAX-ACCESS read-only
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "Type of refclock connected to NTP time server as value"
| |
− | --- " 0: not available"
| |
− | --- " 1: GPS167 1HE"
| |
− | --- " 2: GPS167 BGT/TGP"
| |
− | --- " 3: PZF509 1HE"
| |
− | --- " 4: PZF509 BGT/TGP"
| |
− | --- " 5: SHS 1HE"
| |
− | --- " 6: SHS BGT"
| |
− | --- " 7: SHS-FRC 1HE"
| |
− | --- " 8: SHS-FRC BGT"
| |
− | --- " 9: TCR509 1HE"
| |
− | --- "10: TCR509 BGT/TGP"
| |
− | --- "11: RDT 1HE"
| |
− | --- "12: RDT BGT/TGP"
| |
− | --- "13: EDT 1HE"
| |
− | --- "14: EDT BGT/TGP"
| |
− | --- "15: AHS"
| |
− | --- "16: DHS"
| |
− | --- "17: NDT167 1HE"
| |
− | --- "18: NDT167 BGT"
| |
− | --- "19: DCT 1HE"
| |
− | --- "20: DCT BGT"
| |
− | --- "21: SHS-TCR 1HE"
| |
− | --- "22: SHS-TCR BGT"
| |
− |
| |
− |
| |
− | DEFVAL { 0 }
| |
− | ::= { mbgLtRefclock 2 }
| |
− |
| |
− |
| |
− | mbgLtRefClockMode OBJECT-TYPE
| |
− | SYNTAX DisplayString
| |
− | MAX-ACCESS read-only
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "current mode of refclock connected to NTP time server "
| |
− | ::= { mbgLtRefclock 3 }
| |
− |
| |
− | mbgLtRefClockModeVal OBJECT-TYPE
| |
− | SYNTAX INTEGER {
| |
− | notavailable(0),
| |
− | normalOperation(1),
| |
− | trackingSearching(2),
| |
− | antennaFaulty(3),
| |
− | warmBoot(4),
| |
− | coldBoot(5),
| |
− | antennaShortcircuit(6)
| |
− | }
| |
− |
| |
− | MAX-ACCESS read-only
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "current mode of refclock connected to NTP time server as value"
| |
− | --- " 0: not available"
| |
− | --- " 1: Normal Operation"
| |
− | --- " 2: Tracking/Searching"
| |
− | --- " 3: Antenna Faulty"
| |
− | --- " 4: Warm Boot"
| |
− | --- " 5: Cold Boot"
| |
− | --- " 6: Antenna Short Circuit"
| |
− | DEFVAL { 0 }
| |
− | ::= { mbgLtRefclock 4 }
| |
− |
| |
− | mbgLtRefGpsState OBJECT-TYPE
| |
− | SYNTAX DisplayString
| |
− | MAX-ACCESS read-only
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "current State of GPS refclock conneted to NTP time server "
| |
− | ::= { mbgLtRefclock 5 }
| |
− |
| |
− | mbgLtRefGpsStateVal OBJECT-TYPE
| |
− | SYNTAX INTEGER {
| |
− | notavailable(0),
| |
− | synchronized(1),
| |
− | notsynchronized(2)
| |
− | }
| |
− |
| |
− | MAX-ACCESS read-only
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "current State of GPS refclock conneted to NTP time server as value"
| |
− | --- " 0: not available"
| |
− | --- " 1: synchronized"
| |
− | --- " 2: not synchronized"
| |
− | DEFVAL { 0 }
| |
− | ::= { mbgLtRefclock 6 }
| |
− |
| |
− | mbgLtRefGpsPosition OBJECT-TYPE
| |
− | SYNTAX DisplayString
| |
− | MAX-ACCESS read-only
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "current Position of GPS refclock conneted to NTP time server "
| |
− | ::= { mbgLtRefclock 7 }
| |
− |
| |
− | mbgLtRefGpsSatellites OBJECT-TYPE
| |
− | SYNTAX DisplayString
| |
− | MAX-ACCESS read-only
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "current Satellites in view and good of GPS refclock connected to NTP time server "
| |
− | ::= { mbgLtRefclock 8 }
| |
− |
| |
− | mbgLtRefGpsSatellitesGood OBJECT-TYPE
| |
− | SYNTAX Integer32 (-2147483648..2147483647)
| |
− | MAX-ACCESS read-only
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "current good Satellites of GPS refclock connected to NTP time server as value"
| |
− | ::= { mbgLtRefclock 9 }
| |
− |
| |
− | mbgLtRefGpsSatellitesInView OBJECT-TYPE
| |
− | SYNTAX Integer32 (-2147483648..2147483647)
| |
− | MAX-ACCESS read-only
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "current Satellites in view of GPS refclock conneted to NTP time server as value"
| |
− | ::= { mbgLtRefclock 10 }
| |
− |
| |
− | mbgLtRefPzfState OBJECT-TYPE
| |
− | SYNTAX DisplayString
| |
− | MAX-ACCESS read-only
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "current State of DCF77/PZF refclock connected to NTP time server "
| |
− | ::= { mbgLtRefclock 11 }
| |
− |
| |
− | mbgLtRefPzfStateVal OBJECT-TYPE
| |
− | SYNTAX INTEGER {
| |
− | notavailable(0),
| |
− | sync(1),
| |
− | notsyncnow(2),
| |
− | neversynced(3)
| |
− | }
| |
− |
| |
− | MAX-ACCESS read-only
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "current State of DCF77/PZF refclock connected to NTP time server as value"
| |
− | --- " 0: not available"
| |
− | --- " 1: sync"
| |
− | --- " 2: not sync now"
| |
− | --- " 3: never synced"
| |
− | DEFVAL { 0 }
| |
− | ::= { mbgLtRefclock 12 }
| |
− |
| |
− | mbgLtRefPzfKorrelation OBJECT-TYPE
| |
− | SYNTAX Integer32 (0..255)
| |
− | MAX-ACCESS read-only
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "current Korrelation of DCF77/PZF refclock connected to NTP time server "
| |
− | --- " 0: not available"
| |
− | --- " 254: Antenna Faulty"
| |
− | --- " 255: Gsync"
| |
− | --- " minimum of 60 to get synchronization"
| |
− | --- " optimal value of 75"
| |
− | DEFVAL { 0 }
| |
− | ::= { mbgLtRefclock 13 }
| |
− |
| |
− | mbgLtRefPzfField OBJECT-TYPE
| |
− | SYNTAX Integer32 (-2147483648..2147483647)
| |
− | MAX-ACCESS read-only
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "current strength of field of DCF77/PZF refclock connected to NTP time server "
| |
− | --- " 0: not available"
| |
− | DEFVAL { 0 }
| |
− | ::= { mbgLtRefclock 14 }
| |
− |
| |
− |
| |
− | mbgLtRefGpsMode OBJECT-TYPE
| |
− | SYNTAX DisplayString
| |
− | MAX-ACCESS read-only
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "current Mode of GPS refclock connected to NTP time server "
| |
− | ::= { mbgLtRefclock 15 }
| |
− |
| |
− | mbgLtRefGpsModeVal OBJECT-TYPE
| |
− | SYNTAX INTEGER {
| |
− | notavailable(0),
| |
− | normalOperation(1),
| |
− | trackingSearching(2),
| |
− | antennaFaulty(3),
| |
− | warmBoot(4),
| |
− | coldBoot(5),
| |
− | antennaShortcircuit(6)
| |
− | }
| |
− |
| |
− | MAX-ACCESS read-only
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "current Mode of GPS refclock connected to NTP time server as value"
| |
− | --- " 0: not available"
| |
− | --- " 1: Normal Operation"
| |
− | --- " 2: Tracking/Searching"
| |
− | --- " 3: Antenna Faulty"
| |
− | --- " 4: Warm Boot"
| |
− | --- " 5: Cold Boot"
| |
− | --- " 6: Antenna Short Circuit"
| |
− | --- This variable was formerly known as mbgLtRefClockModeVal
| |
− | DEFVAL { 0 }
| |
− | ::= { mbgLtRefclock 16 }
| |
− |
| |
− | mbgLtRefIrigMode OBJECT-TYPE
| |
− | SYNTAX DisplayString
| |
− | MAX-ACCESS read-only
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "current Mode of IRIG refclock conneted to NTP time server "
| |
− | ::= { mbgLtRefclock 17 }
| |
− |
| |
− | mbgLtRefIrigModeVal OBJECT-TYPE
| |
− | SYNTAX INTEGER {
| |
− | notavailable(0),
| |
− | locked(1),
| |
− | notlocked(2),
| |
− | telegramError(3)
| |
− | }
| |
− | MAX-ACCESS read-only
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "current Mode of IRIG refclock conneted to NTP time server as value"
| |
− | --- " 0: not available"
| |
− | --- " 1: Sync (locked)"
| |
− | --- " 2: Not sync (not locked)"
| |
− | --- " 3: Telegram error"
| |
− | DEFVAL { 0 }
| |
− | ::= { mbgLtRefclock 18 }
| |
− |
| |
− |
| |
− | mbgLtRefPzfMode OBJECT-TYPE
| |
− | SYNTAX DisplayString
| |
− | MAX-ACCESS read-only
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "current Mode of PZF refclock connected to NTP time server "
| |
− | ::= { mbgLtRefclock 19 }
| |
− |
| |
− | mbgLtRefPzfModeVal OBJECT-TYPE
| |
− | SYNTAX INTEGER {
| |
− | notavailable(0),
| |
− | normalOperation(1),
| |
− | antennaFaulty(2)
| |
− | }
| |
− |
| |
− | MAX-ACCESS read-only
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "current Mode of PZF refclock connected to NTP time server as value"
| |
− | --- " 0: not available"
| |
− | --- " 1: Normal Operation"
| |
− | --- " 2: Antenna Faulty"
| |
− | DEFVAL { 0 }
| |
− | ::= { mbgLtRefclock 20 }
| |
− |
| |
− |
| |
− | mbgLtRefIrigState OBJECT-TYPE
| |
− | SYNTAX DisplayString
| |
− | MAX-ACCESS read-only
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "current State of IRIG refclock connected to NTP time server "
| |
− | ::= { mbgLtRefclock 21 }
| |
− |
| |
− | mbgLtRefIrigStateVal OBJECT-TYPE
| |
− | SYNTAX Integer32 (-2147483648..2147483647)
| |
− | MAX-ACCESS read-only
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "current State of IRIG refclock connected to NTP time server as value"
| |
− | --- Please refer to manual for IRIG states. They are represented by set/unset bits,
| |
− | --- so this value is a "binary" form combining all possible IRIG states of our IRIG refclock
| |
− | DEFVAL { 0 }
| |
− | ::= { mbgLtRefclock 22 }
| |
− |
| |
− | mbgLtRefSHSMode OBJECT-TYPE
| |
− | SYNTAX DisplayString
| |
− | MAX-ACCESS read-only
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "current Mode of SHS system connected to NTP time server "
| |
− | ::= { mbgLtRefclock 23 }
| |
− |
| |
− | mbgLtRefSHSModeVal OBJECT-TYPE
| |
− | SYNTAX INTEGER {
| |
− | notavailable(0),
| |
− | normalOperation(1),
| |
− | stoppedTimeLimitError(2)
| |
− | }
| |
− |
| |
− | MAX-ACCESS read-only
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "current Mode of SHS system connected to NTP time server as value"
| |
− | --- " 0: not available"
| |
− | --- " 1: Normal Operation"
| |
− | --- " 2: Stopped/Time Limit Error"
| |
− | DEFVAL { 0 }
| |
− | ::= { mbgLtRefclock 24 }
| |
− |
| |
− | mbgLtRefSHSTimeDiff OBJECT-TYPE
| |
− | SYNTAX Integer32 (-2147483648..2147483647)
| |
− | MAX-ACCESS read-only
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "current time difference between the two SHS reference time sources in miliseconds"
| |
− | DEFVAL { 0 }
| |
− | ::= { mbgLtRefclock 25 }
| |
− |
| |
− | mbgLtRefDctState OBJECT-TYPE
| |
− | SYNTAX DisplayString
| |
− | MAX-ACCESS read-only
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "current State of DCF77 refclock connected to NTP time server "
| |
− | ::= { mbgLtRefclock 26 }
| |
− |
| |
− | mbgLtRefDctStateVal OBJECT-TYPE
| |
− | SYNTAX INTEGER {
| |
− | notavailable(0),
| |
− | sync(1),
| |
− | notsyncnow(2),
| |
− | neversynced(3)
| |
− | }
| |
− |
| |
− | MAX-ACCESS read-only
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "current State of DCF77 refclock connected to NTP time server as value"
| |
− | --- " 0: not available"
| |
− | --- " 1: sync"
| |
− | --- " 2: not sync now"
| |
− | --- " 3: never synced"
| |
− | DEFVAL { 0 }
| |
− | ::= { mbgLtRefclock 27 }
| |
− |
| |
− | mbgLtRefDctField OBJECT-TYPE
| |
− | SYNTAX DisplayString
| |
− | MAX-ACCESS read-only
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "current strength of field of DCF77 refclock connected to NTP time server "
| |
− | --- " 0: not available"
| |
− | DEFVAL { "0" }
| |
− | ::= { mbgLtRefclock 28 }
| |
− |
| |
− | mbgLtRefDctMode OBJECT-TYPE
| |
− | SYNTAX DisplayString
| |
− | MAX-ACCESS read-only
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "current Mode of DCF77 refclock connected to NTP time server "
| |
− | ::= { mbgLtRefclock 29 }
| |
− |
| |
− | mbgLtRefDctModeVal OBJECT-TYPE
| |
− | SYNTAX INTEGER {
| |
− | notavailable(0),
| |
− | normalOperation(1),
| |
− | antennaFaulty(2)
| |
− | }
| |
− |
| |
− | MAX-ACCESS read-only
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "current Mode of DCF77 refclock connected to NTP time server as value"
| |
− | --- " 0: not available"
| |
− | --- " 1: Normal Operation"
| |
− | --- " 2: Antenna Faulty"
| |
− | DEFVAL { 0 }
| |
− | ::= { mbgLtRefclock 30 }
| |
− |
| |
− | --
| |
− | -- Lantime SNMP trap definitions
| |
− | --
| |
− |
| |
− | mbgLtNotifications OBJECT IDENTIFIER ::= { mbgLantime 3 }
| |
− | mbgLtTraps OBJECT IDENTIFIER ::= { mbgLtNotifications 0 }
| |
− |
| |
− |
| |
− | mbgLtTrapNTPNotSync NOTIFICATION-TYPE
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "trap to be sent when NTP is not synchronised "
| |
− | ::= { mbgLtTraps 1 }
| |
− |
| |
− | mbgLtTrapNTPStopped NOTIFICATION-TYPE
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "trap to be sent when NTP is stopped "
| |
− | ::= { mbgLtTraps 2 }
| |
− |
| |
− | mbgLtTrapServerBoot NOTIFICATION-TYPE
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "trap to be sent when time server has finished boot sequence "
| |
− | ::= { mbgLtTraps 3 }
| |
− |
| |
− | mbgLtTrapReceiverNotResponding NOTIFICATION-TYPE
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "trap to be sent when receiver is not responding "
| |
− | ::= { mbgLtTraps 4 }
| |
− |
| |
− | mbgLtTrapReceiverNotSync NOTIFICATION-TYPE
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "trap to be sent when receiver is not synchronised "
| |
− | ::= { mbgLtTraps 5 }
| |
− |
| |
− | mbgLtTrapAntennaFaulty NOTIFICATION-TYPE
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "trap to be sent when connection to antenna is broken "
| |
− | ::= { mbgLtTraps 6 }
| |
− |
| |
− | mbgLtTrapAntennaReconnect NOTIFICATION-TYPE
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "trap to be sent when antenna has been reconnected "
| |
− | ::= { mbgLtTraps 7 }
| |
− |
| |
− | mbgLtTrapConfigChanged NOTIFICATION-TYPE
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "trap to be sent when timeserver reloaded its configuration "
| |
− | ::= { mbgLtTraps 8 }
| |
− |
| |
− | mbgLtTrapLeapSecondAnnounced NOTIFICATION-TYPE
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "trap to be sent when a leap second has been announced "
| |
− | ::= { mbgLtTraps 9 }
| |
− |
| |
− | mbgLtTrapSHSTimeLimitError NOTIFICATION-TYPE
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "trap to be sent when SHS timelimit exceeded "
| |
− | ::= { mbgLtTraps 10 }
| |
− |
| |
− | mbgLtTrapSecondaryRecNotSync NOTIFICATION-TYPE
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "trap to be sent when secondary receiver in SHS system is not synchronised "
| |
− | ::= { mbgLtTraps 11 }
| |
− |
| |
− | mbgLtTrapPowerSupplyFailure NOTIFICATION-TYPE
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "trap to be sent when one of the redundant power supplies fails"
| |
− | ::= { mbgLtTraps 12 }
| |
− |
| |
− | mbgLtTrapAntennaShortCircuit NOTIFICATION-TYPE
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "trap to be sent when a connected antenna fails due to a short circuit"
| |
− | ::= { mbgLtTraps 13 }
| |
− |
| |
− | mbgLtTrapNormalOperation NOTIFICATION-TYPE
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "trap to be sent when the system returned to a healthy state "
| |
− | ::= { mbgLtTraps 77 }
| |
− |
| |
− | mbgLtTrapHeartbeat NOTIFICATION-TYPE
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "trap to be sent periodically to indicate that time server is still alive "
| |
− | ::= { mbgLtTraps 88 }
| |
− |
| |
− | mbgLtTrapTestNotification NOTIFICATION-TYPE
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "trap to be sent when a test notification has been requested "
| |
− | ::= { mbgLtTraps 99 }
| |
− |
| |
− | mbgLtTrapMessage OBJECT-TYPE
| |
− | SYNTAX DisplayString
| |
− | MAX-ACCESS read-only
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "used as a payload object for all traps, holds a clear text event message"
| |
− | DEFVAL { "no event" }
| |
− | ::= { mbgLtTraps 100 }
| |
− |
| |
− | --
| |
− | -- Meinberg Lantime CFG MIB objects for agent module
| |
− | --
| |
− |
| |
− |
| |
− | mbgLtCfg OBJECT IDENTIFIER ::= { mbgLantime 4 }
| |
− |
| |
− | --
| |
− | -- Network parameters
| |
− | --
| |
− |
| |
− |
| |
− | mbgLtCfgNetwork OBJECT IDENTIFIER ::= { mbgLtCfg 1 }
| |
− |
| |
− | mbgLtCfgHostname OBJECT-TYPE
| |
− | SYNTAX DisplayString
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "The hostname configured for this LANTIME"
| |
− | ::= { mbgLtCfgNetwork 1 }
| |
− |
| |
− | mbgLtCfgDomainname OBJECT-TYPE
| |
− | SYNTAX DisplayString
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "The domainname configured for this LANTIME"
| |
− | ::= { mbgLtCfgNetwork 2 }
| |
− |
| |
− |
| |
− | mbgLtCfgNameserver1 OBJECT-TYPE
| |
− | SYNTAX DisplayString
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "The first nameserver used by this LANTIME"
| |
− | ::= { mbgLtCfgNetwork 3 }
| |
− |
| |
− | mbgLtCfgNameserver2 OBJECT-TYPE
| |
− | SYNTAX DisplayString
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "The second nameserver used this LANTIME"
| |
− | ::= { mbgLtCfgNetwork 4 }
| |
− |
| |
− | mbgLtCfgSyslogserver1 OBJECT-TYPE
| |
− | SYNTAX DisplayString
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "The first syslog server we are sending log entries to"
| |
− | ::= { mbgLtCfgNetwork 5 }
| |
− |
| |
− | mbgLtCfgSyslogserver2 OBJECT-TYPE
| |
− | SYNTAX DisplayString
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "The second syslog server we are sending log entries to"
| |
− | ::= { mbgLtCfgNetwork 6 }
| |
− |
| |
− | mbgLtCfgTelnetAccess OBJECT-TYPE
| |
− | SYNTAX INTEGER {
| |
− | disabled(0),
| |
− | enabled(1)
| |
− | }
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "Is telnet administration enabled"
| |
− | --- "1 = true, 2 = false"
| |
− | ::= { mbgLtCfgNetwork 7 }
| |
− |
| |
− | mbgLtCfgFTPAccess OBJECT-TYPE
| |
− | SYNTAX INTEGER {
| |
− | disabled(0),
| |
− | enabled(1)
| |
− | }
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "Is FTP administration enabled"
| |
− | --- "1 = true, 2 = false"
| |
− | ::= { mbgLtCfgNetwork 8 }
| |
− |
| |
− | mbgLtCfgHTTPAccess OBJECT-TYPE
| |
− | SYNTAX INTEGER {
| |
− | disabled(0),
| |
− | enabled(1)
| |
− | }
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "Is web based administration enabled"
| |
− | --- "1 = true, 2 = false"
| |
− | ::= { mbgLtCfgNetwork 9 }
| |
− |
| |
− | mbgLtCfgHTTPSAccess OBJECT-TYPE
| |
− | SYNTAX INTEGER {
| |
− | disabled(0),
| |
− | enabled(1)
| |
− | }
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "Is secure web based administration enabled"
| |
− | --- "1 = true, 2 = false"
| |
− | ::= { mbgLtCfgNetwork 10 }
| |
− |
| |
− | mbgLtCfgSNMPAccess OBJECT-TYPE
| |
− | SYNTAX INTEGER {
| |
− | disabled(0),
| |
− | enabled(1)
| |
− | }
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "Is SNMP administration enabled"
| |
− | --- "1 = true, 2 = false"
| |
− | ::= { mbgLtCfgNetwork 11 }
| |
− |
| |
− | mbgLtCfgSambaAccess OBJECT-TYPE
| |
− | SYNTAX INTEGER {
| |
− | disabled(0),
| |
− | enabled(1)
| |
− | }
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "Is Samba administration enabled"
| |
− | --- "1 = true, 2 = false"
| |
− | ::= { mbgLtCfgNetwork 12 }
| |
− |
| |
− | mbgLtCfgIPv6Access OBJECT-TYPE
| |
− | SYNTAX INTEGER {
| |
− | disabled(0),
| |
− | enabled(1)
| |
− | }
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "Is IPv6 support enabled"
| |
− | --- "1 = true, 2 = false"
| |
− | ::= { mbgLtCfgNetwork 13 }
| |
− |
| |
− | mbgLtCfgSSHAccess OBJECT-TYPE
| |
− | SYNTAX INTEGER {
| |
− | disabled(0),
| |
− | enabled(1)
| |
− | }
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "Is SSH administration enabled"
| |
− | --- "1 = true, 2 = false"
| |
− | ::= { mbgLtCfgNetwork 14 }
| |
− |
| |
− |
| |
− |
| |
− |
| |
− | --
| |
− | -- NTP parameters
| |
− | --
| |
− |
| |
− |
| |
− | mbgLtCfgNTP OBJECT IDENTIFIER ::= { mbgLtCfg 2 }
| |
− |
| |
− |
| |
− | mbgLtCfgNTPServer1 OBJECT IDENTIFIER ::= { mbgLtCfgNTP 1 }
| |
− | mbgLtCfgNTPServer2 OBJECT IDENTIFIER ::= { mbgLtCfgNTP 2 }
| |
− | mbgLtCfgNTPServer3 OBJECT IDENTIFIER ::= { mbgLtCfgNTP 3 }
| |
− | mbgLtCfgNTPServer4 OBJECT IDENTIFIER ::= { mbgLtCfgNTP 4 }
| |
− | mbgLtCfgNTPServer5 OBJECT IDENTIFIER ::= { mbgLtCfgNTP 5 }
| |
− | mbgLtCfgNTPServer6 OBJECT IDENTIFIER ::= { mbgLtCfgNTP 6 }
| |
− | mbgLtCfgNTPServer7 OBJECT IDENTIFIER ::= { mbgLtCfgNTP 7 }
| |
− |
| |
− | mbgLtCfgNTPServer1IP OBJECT-TYPE
| |
− | SYNTAX DisplayString
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "IP address for external NTP server"
| |
− | ::= { mbgLtCfgNTPServer1 1 }
| |
− |
| |
− | mbgLtCfgNTPServer1Key OBJECT-TYPE
| |
− | SYNTAX Integer32 (-2147483648..2147483647)
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "Key for external NTP server"
| |
− | ::= { mbgLtCfgNTPServer1 2 }
| |
− |
| |
− | mbgLtCfgNTPServer1Autokey OBJECT-TYPE
| |
− | SYNTAX INTEGER {
| |
− | disabled(0),
| |
− | enabled(1)
| |
− | }
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "Is autokey enabled for the external NTP server"
| |
− | --- "1 = true, 2 = false"
| |
− | ::= { mbgLtCfgNTPServer1 3 }
| |
− |
| |
− | mbgLtCfgNTPServer1Prefer OBJECT-TYPE
| |
− | SYNTAX INTEGER {
| |
− | disabled(0),
| |
− | enabled(1)
| |
− | }
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "Is the preferred flag enabled for the external NTP server"
| |
− | --- "1 = true, 2 = false"
| |
− | ::= { mbgLtCfgNTPServer1 4 }
| |
− |
| |
− |
| |
− |
| |
− | mbgLtCfgNTPServer2IP OBJECT-TYPE
| |
− | SYNTAX DisplayString
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "IP address for external NTP server"
| |
− | ::= { mbgLtCfgNTPServer2 1 }
| |
− |
| |
− | mbgLtCfgNTPServer2Key OBJECT-TYPE
| |
− | SYNTAX Integer32 (-2147483648..2147483647)
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "Key for external NTP server"
| |
− | ::= { mbgLtCfgNTPServer2 2 }
| |
− |
| |
− | mbgLtCfgNTPServer2Autokey OBJECT-TYPE
| |
− | SYNTAX INTEGER {
| |
− | disabled(0),
| |
− | enabled(1)
| |
− | }
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "Is autokey enabled for the external NTP server"
| |
− | --- "1 = true, 2 = false"
| |
− | ::= { mbgLtCfgNTPServer2 3 }
| |
− |
| |
− | mbgLtCfgNTPServer2Prefer OBJECT-TYPE
| |
− | SYNTAX INTEGER {
| |
− | disabled(0),
| |
− | enabled(1)
| |
− | }
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "Is the preferred flag enabled for the external NTP server"
| |
− | --- "1 = true, 2 = false"
| |
− | ::= { mbgLtCfgNTPServer2 4 }
| |
− |
| |
− |
| |
− |
| |
− |
| |
− | mbgLtCfgNTPServer3IP OBJECT-TYPE
| |
− | SYNTAX DisplayString
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "IP address for external NTP server"
| |
− | ::= { mbgLtCfgNTPServer3 1 }
| |
− |
| |
− | mbgLtCfgNTPServer3Key OBJECT-TYPE
| |
− | SYNTAX Integer32 (-2147483648..2147483647)
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "Key for external NTP server"
| |
− | ::= { mbgLtCfgNTPServer3 2 }
| |
− |
| |
− | mbgLtCfgNTPServer3Autokey OBJECT-TYPE
| |
− | SYNTAX INTEGER {
| |
− | disabled(0),
| |
− | enabled(1)
| |
− | }
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "Is autokey enabled for the external NTP server"
| |
− | --- "1 = true, 2 = false"
| |
− | ::= { mbgLtCfgNTPServer3 3 }
| |
− |
| |
− | mbgLtCfgNTPServer3Prefer OBJECT-TYPE
| |
− | SYNTAX INTEGER {
| |
− | disabled(0),
| |
− | enabled(1)
| |
− | }
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "Is the preferred flag enabled for the external NTP server"
| |
− | --- "1 = true, 2 = false"
| |
− | ::= { mbgLtCfgNTPServer3 4 }
| |
− |
| |
− |
| |
− |
| |
− |
| |
− | mbgLtCfgNTPServer4IP OBJECT-TYPE
| |
− | SYNTAX DisplayString
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "IP address for external NTP server"
| |
− | ::= { mbgLtCfgNTPServer4 1 }
| |
− |
| |
− | mbgLtCfgNTPServer4Key OBJECT-TYPE
| |
− | SYNTAX Integer32 (-2147483648..2147483647)
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "Key for external NTP server"
| |
− | ::= { mbgLtCfgNTPServer4 2 }
| |
− |
| |
− | mbgLtCfgNTPServer4Autokey OBJECT-TYPE
| |
− | SYNTAX INTEGER {
| |
− | disabled(0),
| |
− | enabled(1)
| |
− | }
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "Is autokey enabled for the external NTP server"
| |
− | --- "1 = true, 2 = false"
| |
− | ::= { mbgLtCfgNTPServer4 3 }
| |
− |
| |
− | mbgLtCfgNTPServer4Prefer OBJECT-TYPE
| |
− | SYNTAX INTEGER {
| |
− | disabled(0),
| |
− | enabled(1)
| |
− | }
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "Is the preferred flag enabled for the external NTP server"
| |
− | --- "1 = true, 2 = false"
| |
− | ::= { mbgLtCfgNTPServer4 4 }
| |
− |
| |
− |
| |
− |
| |
− | mbgLtCfgNTPServer5IP OBJECT-TYPE
| |
− | SYNTAX DisplayString
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "IP address for external NTP server"
| |
− | ::= { mbgLtCfgNTPServer5 1 }
| |
− |
| |
− | mbgLtCfgNTPServer5Key OBJECT-TYPE
| |
− | SYNTAX Integer32 (-2147483648..2147483647)
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "Key for external NTP server"
| |
− | ::= { mbgLtCfgNTPServer5 2 }
| |
− |
| |
− | mbgLtCfgNTPServer5Autokey OBJECT-TYPE
| |
− | SYNTAX INTEGER {
| |
− | disabled(0),
| |
− | enabled(1)
| |
− | }
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "Is autokey enabled for the external NTP server"
| |
− | --- "1 = true, 2 = false"
| |
− | ::= { mbgLtCfgNTPServer5 3 }
| |
− |
| |
− | mbgLtCfgNTPServer5Prefer OBJECT-TYPE
| |
− | SYNTAX INTEGER {
| |
− | disabled(0),
| |
− | enabled(1)
| |
− | }
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "Is the preferred flag enabled for the external NTP server"
| |
− | --- "1 = true, 2 = false"
| |
− | ::= { mbgLtCfgNTPServer5 4 }
| |
− |
| |
− |
| |
− |
| |
− |
| |
− | mbgLtCfgNTPServer6IP OBJECT-TYPE
| |
− | SYNTAX DisplayString
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "IP address for external NTP server"
| |
− | ::= { mbgLtCfgNTPServer6 1 }
| |
− |
| |
− | mbgLtCfgNTPServer6Key OBJECT-TYPE
| |
− | SYNTAX Integer32 (-2147483648..2147483647)
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "Key for external NTP server"
| |
− | ::= { mbgLtCfgNTPServer6 2 }
| |
− |
| |
− | mbgLtCfgNTPServer6Autokey OBJECT-TYPE
| |
− | SYNTAX INTEGER {
| |
− | disabled(0),
| |
− | enabled(1)
| |
− | }
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "Is autokey enabled for the external NTP server"
| |
− | --- "1 = true, 2 = false"
| |
− | ::= { mbgLtCfgNTPServer6 3 }
| |
− |
| |
− | mbgLtCfgNTPServer6Prefer OBJECT-TYPE
| |
− | SYNTAX INTEGER {
| |
− | disabled(0),
| |
− | enabled(1)
| |
− | }
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "Is the preferred flag enabled for the external NTP server"
| |
− | --- "1 = true, 2 = false"
| |
− | ::= { mbgLtCfgNTPServer6 4 }
| |
− |
| |
− |
| |
− |
| |
− | mbgLtCfgNTPServer7IP OBJECT-TYPE
| |
− | SYNTAX DisplayString
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "IP address for external NTP server"
| |
− | ::= { mbgLtCfgNTPServer7 1 }
| |
− |
| |
− | mbgLtCfgNTPServer7Key OBJECT-TYPE
| |
− | SYNTAX Integer32 (-2147483648..2147483647)
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "Key for external NTP server"
| |
− | ::= { mbgLtCfgNTPServer7 2 }
| |
− |
| |
− | mbgLtCfgNTPServer7Autokey OBJECT-TYPE
| |
− | SYNTAX INTEGER {
| |
− | disabled(0),
| |
− | enabled(1)
| |
− | }
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "Is autokey enabled for the external NTP server"
| |
− | --- "1 = true, 2 = false"
| |
− | ::= { mbgLtCfgNTPServer7 3 }
| |
− |
| |
− | mbgLtCfgNTPServer7Prefer OBJECT-TYPE
| |
− | SYNTAX INTEGER {
| |
− | disabled(0),
| |
− | enabled(1)
| |
− | }
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "Is the preferred flag enabled for the external NTP server"
| |
− | --- "1 = true, 2 = false"
| |
− | ::= { mbgLtCfgNTPServer7 4 }
| |
− |
| |
− |
| |
− |
| |
− |
| |
− |
| |
− | mbgLtCfgNTPStratumLocalClock OBJECT-TYPE
| |
− | SYNTAX Integer32 (0..15)
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "The stratum value assigned to the local clock of the timeserver"
| |
− | ::= { mbgLtCfgNTP 8 }
| |
− |
| |
− |
| |
− | mbgLtCfgNTPTrustedKey OBJECT-TYPE
| |
− | SYNTAX Integer32 (-2147483648..2147483647)
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "The key used for the internal refclock of the timeserver"
| |
− | ::= { mbgLtCfgNTP 9 }
| |
− |
| |
− | mbgLtCfgNTPBroadcastIP OBJECT-TYPE
| |
− | SYNTAX DisplayString
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "NTP broadcast IP address"
| |
− | ::= { mbgLtCfgNTP 10 }
| |
− |
| |
− | mbgLtCfgNTPBroadcastKey OBJECT-TYPE
| |
− | SYNTAX Integer32 (-2147483648..2147483647)
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "Key used for NTP broadcasts"
| |
− | ::= { mbgLtCfgNTP 11 }
| |
− |
| |
− |
| |
− | mbgLtCfgNTPBroadcastAutokey OBJECT-TYPE
| |
− | SYNTAX INTEGER {
| |
− | disabled(0),
| |
− | enabled(1)
| |
− | }
| |
− |
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "Is autokey generation used for NTP broadcasts"
| |
− | ::= { mbgLtCfgNTP 12 }
| |
− |
| |
− |
| |
− | mbgLtCfgNTPAutokeyFeature OBJECT-TYPE
| |
− |
| |
− | SYNTAX INTEGER {
| |
− | disabled(0),
| |
− | enabled(1)
| |
− | }
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "Is the NTP autokey feature enabled"
| |
− | --- "1 = true, 2 = false"
| |
− | ::= { mbgLtCfgNTP 13 }
| |
− |
| |
− |
| |
− | mbgLtCfgNTPAtomPPS OBJECT-TYPE
| |
− |
| |
− | SYNTAX INTEGER {
| |
− | disabled(0),
| |
− | enabled(1)
| |
− | }
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "Is the NTP atom pps feature enabled"
| |
− | --- "1 = true, 2 = false"
| |
− | ::= { mbgLtCfgNTP 14 }
| |
− |
| |
− |
| |
− |
| |
− |
| |
− | --
| |
− | -- EMail parameters
| |
− | --
| |
− |
| |
− |
| |
− | mbgLtCfgEMail OBJECT IDENTIFIER ::= { mbgLtCfg 3 }
| |
− |
| |
− | mbgLtCfgEMailTo OBJECT-TYPE
| |
− | SYNTAX DisplayString
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "EMail address to send alerts etc. to (receiving address)"
| |
− | ::= { mbgLtCfgEMail 1 }
| |
− |
| |
− | mbgLtCfgEMailFrom OBJECT-TYPE
| |
− | SYNTAX DisplayString
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "EMail address to send alerts etc. from (sending address)"
| |
− | ::= { mbgLtCfgEMail 2 }
| |
− |
| |
− | mbgLtCfgEMailSmarthost OBJECT-TYPE
| |
− | SYNTAX DisplayString
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "SMTP smarthost used to send mail"
| |
− | ::= { mbgLtCfgEMail 3 }
| |
− |
| |
− |
| |
− | --
| |
− | -- SNMP parameters
| |
− | --
| |
− |
| |
− |
| |
− |
| |
− | mbgLtCfgSNMP OBJECT IDENTIFIER ::= { mbgLtCfg 4 }
| |
− |
| |
− | mbgLtCfgSNMPTrapReceiver1 OBJECT-TYPE
| |
− | SYNTAX DisplayString
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "First SNMP trap receiver host"
| |
− | ::= { mbgLtCfgSNMP 1 }
| |
− |
| |
− | mbgLtCfgSNMPTrapReceiver2 OBJECT-TYPE
| |
− | SYNTAX DisplayString
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "Second SNMP trap receiver host"
| |
− | ::= { mbgLtCfgSNMP 2 }
| |
− |
| |
− | mbgLtCfgSNMPTrapRec1Community OBJECT-TYPE
| |
− | SYNTAX DisplayString
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "First SNMP trap receiver community"
| |
− | ::= { mbgLtCfgSNMP 3 }
| |
− |
| |
− | mbgLtCfgSNMPTrapRec2Community OBJECT-TYPE
| |
− | SYNTAX DisplayString
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "Second SNMP trap receiver community"
| |
− | ::= { mbgLtCfgSNMP 4 }
| |
− |
| |
− |
| |
− | mbgLtCfgSNMPReadOnlyCommunity OBJECT-TYPE
| |
− | SYNTAX DisplayString
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "SNMP community string for read-only access"
| |
− | ::= { mbgLtCfgSNMP 5 }
| |
− |
| |
− |
| |
− | mbgLtCfgSNMPReadWriteCommunity OBJECT-TYPE
| |
− | SYNTAX DisplayString
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "SNMP community string for read-write access"
| |
− | ::= { mbgLtCfgSNMP 6 }
| |
− |
| |
− |
| |
− | mbgLtCfgSNMPContact OBJECT-TYPE
| |
− | SYNTAX DisplayString
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "SNMP contact string for Lantime"
| |
− | ::= { mbgLtCfgSNMP 7 }
| |
− |
| |
− |
| |
− | mbgLtCfgSNMPLocation OBJECT-TYPE
| |
− | SYNTAX DisplayString
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "SNMP location string for Lantime"
| |
− | ::= { mbgLtCfgSNMP 8 }
| |
− |
| |
− |
| |
− | --
| |
− | -- Winpopup parameters
| |
− | --
| |
− |
| |
− | mbgLtCfgWinpopup OBJECT IDENTIFIER ::= { mbgLtCfg 5 }
| |
− |
| |
− | mbgLtCfgWMailAddress1 OBJECT-TYPE
| |
− | SYNTAX DisplayString
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "First windows popup alert receiver"
| |
− | ::= { mbgLtCfgWinpopup 1 }
| |
− |
| |
− | mbgLtCfgWMailAddress2 OBJECT-TYPE
| |
− | SYNTAX DisplayString
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "Second windows popup alert receiver"
| |
− | ::= { mbgLtCfgWinpopup 2 }
| |
− |
| |
− |
| |
− | --
| |
− | -- Wallmount display parameters
| |
− | --
| |
− |
| |
− |
| |
− | mbgLtCfgWalldisplay OBJECT IDENTIFIER ::= { mbgLtCfg 6 }
| |
− |
| |
− | mbgLtCfgVP100Display1IP OBJECT-TYPE
| |
− | SYNTAX DisplayString
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "IP address of first VP100 wall display"
| |
− | ::= { mbgLtCfgWalldisplay 1 }
| |
− |
| |
− | mbgLtCfgVP100Display1SN OBJECT-TYPE
| |
− | SYNTAX DisplayString
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "Serial number of first VP100 wall display"
| |
− | ::= { mbgLtCfgWalldisplay 2 }
| |
− |
| |
− | mbgLtCfgVP100Display2IP OBJECT-TYPE
| |
− | SYNTAX DisplayString
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "IP address of second VP100 wall display"
| |
− | ::= { mbgLtCfgWalldisplay 3 }
| |
− |
| |
− | mbgLtCfgVP100Display2SN OBJECT-TYPE
| |
− | SYNTAX DisplayString
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "Serial number of second VP100 wall display"
| |
− | ::= { mbgLtCfgWalldisplay 4 }
| |
− |
| |
− |
| |
− |
| |
− |
| |
− | --
| |
− | -- Notify parameters
| |
− | --
| |
− |
| |
− |
| |
− | mbgLtCfgNotify OBJECT IDENTIFIER ::= { mbgLtCfg 7 }
| |
− |
| |
− | mbgLtCfgNotifyNTPNotSync OBJECT-TYPE
| |
− | SYNTAX DisplayString
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "Which alerts are sent in case of a NTP_not_sync event"
| |
− | --- possible strings:
| |
− | --- "email (sending an e-mail)"
| |
− | --- "wmail (sending a win popup message)"
| |
− | --- "snmp (sending a SNMP trap)"
| |
− | --- "disp (showing an alert on wall display)"
| |
− | --- "or a comma separated combination of these"
| |
− | --- "An empty string disables notification for this event."
| |
− | --- "Example: wmail,email (sending a win popup and e-mail message)"
| |
− |
| |
− | ::= { mbgLtCfgNotify 1 }
| |
− |
| |
− | mbgLtCfgNotifyNTPStopped OBJECT-TYPE
| |
− | SYNTAX DisplayString
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "Which alerts are sent in case of a NTP_stopped event"
| |
− | --- possible strings:
| |
− | --- "email (sending an e-mail)"
| |
− | --- "wmail (sending a win popup message)"
| |
− | --- "snmp (sending a SNMP trap)"
| |
− | --- "disp (showing an alert on wall display)"
| |
− | --- "or a comma separated combination of these"
| |
− | --- "An empty string disables notification for this event."
| |
− | --- "Example: wmail,email (sending a win popup and e-mail message)"
| |
− |
| |
− | ::= { mbgLtCfgNotify 2 }
| |
− |
| |
− | mbgLtCfgNotifyServerBoot OBJECT-TYPE
| |
− | SYNTAX DisplayString
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "Which alerts are sent in case of a server_boot event"
| |
− | --- possible strings:
| |
− | --- "email (sending an e-mail)"
| |
− | --- "wmail (sending a win popup message)"
| |
− | --- "snmp (sending a SNMP trap)"
| |
− | --- "disp (showing an alert on wall display)"
| |
− | --- "or a comma separated combination of these"
| |
− | --- "An empty string disables notification for this event."
| |
− | --- "Example: wmail,email (sending a win popup and e-mail message)"
| |
− |
| |
− | ::= { mbgLtCfgNotify 3 }
| |
− |
| |
− | mbgLtCfgNotifyRefclkNoResponse OBJECT-TYPE
| |
− | SYNTAX DisplayString
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "Which alerts are sent in case of a refclock_not_responding event"
| |
− | --- possible strings:
| |
− | --- "email (sending an e-mail)"
| |
− | --- "wmail (sending a win popup message)"
| |
− | --- "snmp (sending a SNMP trap)"
| |
− | --- "disp (showing an alert on wall display)"
| |
− | --- "or a comma separated combination of these"
| |
− | --- "An empty string disables notification for this event."
| |
− | --- "Example: wmail,email (sending a win popup and e-mail message)"
| |
− |
| |
− | ::= { mbgLtCfgNotify 4 }
| |
− |
| |
− | mbgLtCfgNotifyRefclockNotSync OBJECT-TYPE
| |
− | SYNTAX DisplayString
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "Which alerts are sent in case of a refclock_not_sync event"
| |
− | --- possible strings:
| |
− | --- "email (sending an e-mail)"
| |
− | --- "wmail (sending a win popup message)"
| |
− | --- "snmp (sending a SNMP trap)"
| |
− | --- "disp (showing an alert on wall display)"
| |
− | --- "or a comma separated combination of these"
| |
− | --- "An empty string disables notification for this event."
| |
− | --- "Example: wmail,email (sending a win popup and e-mail message)"
| |
− |
| |
− | ::= { mbgLtCfgNotify 5 }
| |
− |
| |
− | mbgLtCfgNotifyAntennaFaulty OBJECT-TYPE
| |
− | SYNTAX DisplayString
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "Which alerts are sent in case of an antenna_faulty event"
| |
− | --- possible strings:
| |
− | --- "email (sending an e-mail)"
| |
− | --- "wmail (sending a win popup message)"
| |
− | --- "snmp (sending a SNMP trap)"
| |
− | --- "disp (showing an alert on wall display)"
| |
− | --- "or a comma separated combination of these"
| |
− | --- "An empty string disables notification for this event."
| |
− | --- "Example: wmail,email (sending a win popup and e-mail message)"
| |
− |
| |
− | ::= { mbgLtCfgNotify 6 }
| |
− |
| |
− | mbgLtCfgNotifyAntennaReconnect OBJECT-TYPE
| |
− | SYNTAX DisplayString
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "Which alerts are sent in case of an antenna_reconnect event"
| |
− | --- possible strings:
| |
− | --- "email (sending an e-mail)"
| |
− | --- "wmail (sending a win popup message)"
| |
− | --- "snmp (sending a SNMP trap)"
| |
− | --- "disp (showing an alert on wall display)"
| |
− | --- "or a comma separated combination of these"
| |
− | --- "An empty string disables notification for this event."
| |
− | --- "Example: wmail,email (sending a win popup and e-mail message)"
| |
− |
| |
− | ::= { mbgLtCfgNotify 7 }
| |
− |
| |
− | mbgLtCfgNotifyConfigChanged OBJECT-TYPE
| |
− | SYNTAX DisplayString
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "Which alerts are sent in case of a config_changed event"
| |
− | --- possible strings:
| |
− | --- "email (sending an e-mail)"
| |
− | --- "wmail (sending a win popup message)"
| |
− | --- "snmp (sending a SNMP trap)"
| |
− | --- "disp (showing an alert on wall display)"
| |
− | --- "or a comma separated combination of these"
| |
− | --- "An empty string disables notification for this event."
| |
− | --- "Example: wmail,email (sending a win popup and e-mail message)"
| |
− |
| |
− | ::= { mbgLtCfgNotify 8 }
| |
− |
| |
− | mbgLtCfgNotifySHSTimeLimitError OBJECT-TYPE
| |
− | SYNTAX DisplayString
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "Which alerts are sent in case of a SHS_timelimiterror event"
| |
− | --- possible strings:
| |
− | --- "email (sending an e-mail)"
| |
− | --- "wmail (sending a win popup message)"
| |
− | --- "snmp (sending a SNMP trap)"
| |
− | --- "disp (showing an alert on wall display)"
| |
− | --- "or a comma separated combination of these."
| |
− | --- "An empty string disables notification for this event."
| |
− | --- "Example: wmail,email (sending a win popup and e-mail message)"
| |
− |
| |
− | ::= { mbgLtCfgNotify 9 }
| |
− |
| |
− |
| |
− |
| |
− | mbgLtCfgNotifyLeapSecond OBJECT-TYPE
| |
− | SYNTAX DisplayString
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "Which alerts are sent in case of a Leap_Second_Announced event"
| |
− | --- possible strings:
| |
− | --- "email (sending an e-mail)"
| |
− | --- "wmail (sending a win popup message)"
| |
− | --- "snmp (sending a SNMP trap)"
| |
− | --- "disp (showing an alert on wall display)"
| |
− | --- "or a comma separated combination of these."
| |
− | --- "An empty string disables notification for this event."
| |
− | --- "Example: wmail,email (sending a win popup and e-mail message)"
| |
− |
| |
− | ::= { mbgLtCfgNotify 10 }
| |
− |
| |
− |
| |
− |
| |
− |
| |
− |
| |
− |
| |
− |
| |
− | --
| |
− | -- Ethernet parameters
| |
− | --
| |
− |
| |
− |
| |
− | mbgLtCfgEthernet OBJECT IDENTIFIER ::= { mbgLtCfg 8 }
| |
− |
| |
− | mbgLtCfgEthernetIf0 OBJECT IDENTIFIER ::= { mbgLtCfgEthernet 0 }
| |
− | mbgLtCfgEthernetIf1 OBJECT IDENTIFIER ::= { mbgLtCfgEthernet 1 }
| |
− | mbgLtCfgEthernetIf2 OBJECT IDENTIFIER ::= { mbgLtCfgEthernet 2 }
| |
− | mbgLtCfgEthernetIf3 OBJECT IDENTIFIER ::= { mbgLtCfgEthernet 3 }
| |
− | mbgLtCfgEthernetIf4 OBJECT IDENTIFIER ::= { mbgLtCfgEthernet 4 }
| |
− | mbgLtCfgEthernetIf5 OBJECT IDENTIFIER ::= { mbgLtCfgEthernet 5 }
| |
− | mbgLtCfgEthernetIf6 OBJECT IDENTIFIER ::= { mbgLtCfgEthernet 6 }
| |
− | mbgLtCfgEthernetIf7 OBJECT IDENTIFIER ::= { mbgLtCfgEthernet 7 }
| |
− | mbgLtCfgEthernetIf8 OBJECT IDENTIFIER ::= { mbgLtCfgEthernet 8 }
| |
− | mbgLtCfgEthernetIf9 OBJECT IDENTIFIER ::= { mbgLtCfgEthernet 9 }
| |
− |
| |
− |
| |
− |
| |
− |
| |
− |
| |
− | mbgLtCfgEthernetIf0IPv4IP OBJECT-TYPE
| |
− | SYNTAX DisplayString
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "The IPv4 address of the first ethernet interface"
| |
− | ::= { mbgLtCfgEthernetIf0 1 }
| |
− |
| |
− | mbgLtCfgEthernetIf0IPv4Netmask OBJECT-TYPE
| |
− | SYNTAX DisplayString
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "The IPv4 netmask of the first ethernet interface"
| |
− | ::= { mbgLtCfgEthernetIf0 2 }
| |
− |
| |
− | mbgLtCfgEthernetIf0IPv4Gateway OBJECT-TYPE
| |
− | SYNTAX DisplayString
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "The IPv4 gateway address of the first ethernet interface"
| |
− | ::= { mbgLtCfgEthernetIf0 3 }
| |
− |
| |
− |
| |
− | mbgLtCfgEthernetIf0DHCPClient OBJECT-TYPE
| |
− | SYNTAX INTEGER {
| |
− | disabled(0),
| |
− | enabled(1)
| |
− | }
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "Is DHCP used to get IP parameters for this interface"
| |
− | --- "1 = true, 2 = false"
| |
− | ::= { mbgLtCfgEthernetIf0 4 }
| |
− |
| |
− | mbgLtCfgEthernetIf0IPv6IP1 OBJECT-TYPE
| |
− | SYNTAX DisplayString
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "The first IPv6 address of the first ethernet interface"
| |
− | ::= { mbgLtCfgEthernetIf0 5 }
| |
− |
| |
− | mbgLtCfgEthernetIf0IPv6IP2 OBJECT-TYPE
| |
− | SYNTAX DisplayString
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "The second IPv6 address of the first ethernet interface"
| |
− | ::= { mbgLtCfgEthernetIf0 6 }
| |
− |
| |
− | mbgLtCfgEthernetIf0IPv6IP3 OBJECT-TYPE
| |
− | SYNTAX DisplayString
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "The third IPv6 address of the first ethernet interface"
| |
− | ::= { mbgLtCfgEthernetIf0 7 }
| |
− |
| |
− | mbgLtCfgEthernetIf0IPv6Autoconf OBJECT-TYPE
| |
− | SYNTAX INTEGER {
| |
− | disabled(0),
| |
− | enabled(1)
| |
− | }
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "Is IPv6 Autoconf used for this interface"
| |
− | --- "1 = true, 2 = false"
| |
− | ::= { mbgLtCfgEthernetIf0 8 }
| |
− |
| |
− | mbgLtCfgEthernetIf0NetLinkMode OBJECT-TYPE
| |
− | SYNTAX INTEGER {
| |
− | autosensing(0),
| |
− | link10half(1),
| |
− | link10full(2),
| |
− | link100half(3),
| |
− | link100full(4)
| |
− | }
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "Link mode for this interface"
| |
− |
| |
− | ::= { mbgLtCfgEthernetIf0 9 }
| |
− |
| |
− |
| |
− | mbgLtCfgEthernetIf1IPv4IP OBJECT-TYPE
| |
− | SYNTAX DisplayString
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "The IPv4 address of the second ethernet interface"
| |
− | ::= { mbgLtCfgEthernetIf1 1 }
| |
− |
| |
− | mbgLtCfgEthernetIf1IPv4Netmask OBJECT-TYPE
| |
− | SYNTAX DisplayString
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "The IPv4 netmask of the second ethernet interface"
| |
− | ::= { mbgLtCfgEthernetIf1 2 }
| |
− |
| |
− | mbgLtCfgEthernetIf1IPv4Gateway OBJECT-TYPE
| |
− | SYNTAX DisplayString
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "The IPv4 gateway address of the second ethernet interface"
| |
− | ::= { mbgLtCfgEthernetIf1 3 }
| |
− |
| |
− |
| |
− | mbgLtCfgEthernetIf1DHCPClient OBJECT-TYPE
| |
− | SYNTAX INTEGER {
| |
− | disabled(0),
| |
− | enabled(1)
| |
− | }
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "Is DHCP used to get IP parameters for this interface"
| |
− | --- "1 = true, 2 = false"
| |
− | ::= { mbgLtCfgEthernetIf1 4 }
| |
− |
| |
− | mbgLtCfgEthernetIf1IPv6IP1 OBJECT-TYPE
| |
− | SYNTAX DisplayString
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "The first IPv6 address of the second ethernet interface"
| |
− | ::= { mbgLtCfgEthernetIf1 5 }
| |
− |
| |
− | mbgLtCfgEthernetIf1IPv6IP2 OBJECT-TYPE
| |
− | SYNTAX DisplayString
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "The second IPv6 address of the second ethernet interface"
| |
− | ::= { mbgLtCfgEthernetIf1 6 }
| |
− |
| |
− | mbgLtCfgEthernetIf1IPv6IP3 OBJECT-TYPE
| |
− | SYNTAX DisplayString
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "The third IPv6 address of the second ethernet interface"
| |
− | ::= { mbgLtCfgEthernetIf1 7 }
| |
− |
| |
− | mbgLtCfgEthernetIf1IPv6Autoconf OBJECT-TYPE
| |
− | SYNTAX INTEGER {
| |
− | disabled(0),
| |
− | enabled(1)
| |
− | }
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "Is IPv6 Autoconf used for this interface"
| |
− | --- "1 = true, 2 = false"
| |
− | ::= { mbgLtCfgEthernetIf1 8 }
| |
− |
| |
− | mbgLtCfgEthernetIf1NetLinkMode OBJECT-TYPE
| |
− | SYNTAX INTEGER {
| |
− | autosensing(0),
| |
− | link10half(1),
| |
− | link10full(2),
| |
− | link100half(3),
| |
− | link100full(4)
| |
− | }
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "Link mode for this interface"
| |
− |
| |
− | ::= { mbgLtCfgEthernetIf1 9 }
| |
− |
| |
− |
| |
− | mbgLtCfgEthernetIf2IPv4IP OBJECT-TYPE
| |
− | SYNTAX DisplayString
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "The IPv4 address of the third ethernet interface"
| |
− | ::= { mbgLtCfgEthernetIf2 1 }
| |
− |
| |
− | mbgLtCfgEthernetIf2IPv4Netmask OBJECT-TYPE
| |
− | SYNTAX DisplayString
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "The IPv4 netmask of the third ethernet interface"
| |
− | ::= { mbgLtCfgEthernetIf2 2 }
| |
− |
| |
− | mbgLtCfgEthernetIf2IPv4Gateway OBJECT-TYPE
| |
− | SYNTAX DisplayString
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "The IPv4 gateway address of the third ethernet interface"
| |
− | ::= { mbgLtCfgEthernetIf2 3 }
| |
− |
| |
− |
| |
− | mbgLtCfgEthernetIf2DHCPClient OBJECT-TYPE
| |
− | SYNTAX INTEGER {
| |
− | disabled(0),
| |
− | enabled(1)
| |
− | }
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "Is DHCP used to get IP parameters for this interface"
| |
− | --- "1 = true, 2 = false"
| |
− | ::= { mbgLtCfgEthernetIf2 4 }
| |
− |
| |
− | mbgLtCfgEthernetIf2IPv6IP1 OBJECT-TYPE
| |
− | SYNTAX DisplayString
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "The first IPv6 address of the third ethernet interface"
| |
− | ::= { mbgLtCfgEthernetIf2 5 }
| |
− |
| |
− | mbgLtCfgEthernetIf2IPv6IP2 OBJECT-TYPE
| |
− | SYNTAX DisplayString
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "The second IPv6 address of the third ethernet interface"
| |
− | ::= { mbgLtCfgEthernetIf2 6 }
| |
− |
| |
− | mbgLtCfgEthernetIf2IPv6IP3 OBJECT-TYPE
| |
− | SYNTAX DisplayString
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "The third IPv6 address of the third ethernet interface"
| |
− | ::= { mbgLtCfgEthernetIf2 7 }
| |
− |
| |
− | mbgLtCfgEthernetIf2IPv6Autoconf OBJECT-TYPE
| |
− | SYNTAX INTEGER {
| |
− | disabled(0),
| |
− | enabled(1)
| |
− | }
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "Is IPv6 Autoconf used for this interface"
| |
− | --- "1 = true, 2 = false"
| |
− | ::= { mbgLtCfgEthernetIf2 8 }
| |
− |
| |
− | mbgLtCfgEthernetIf2NetLinkMode OBJECT-TYPE
| |
− | SYNTAX INTEGER {
| |
− | autosensing(0),
| |
− | link10half(1),
| |
− | link10full(2),
| |
− | link100half(3),
| |
− | link100full(4)
| |
− | }
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "Link mode for this interface"
| |
− |
| |
− | ::= { mbgLtCfgEthernetIf2 9 }
| |
− |
| |
− |
| |
− | mbgLtCfgEthernetIf3IPv4IP OBJECT-TYPE
| |
− | SYNTAX DisplayString
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "The IPv4 address of the fourth ethernet interface"
| |
− | ::= { mbgLtCfgEthernetIf3 1 }
| |
− |
| |
− | mbgLtCfgEthernetIf3IPv4Netmask OBJECT-TYPE
| |
− | SYNTAX DisplayString
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "The IPv4 netmask of the fourth ethernet interface"
| |
− | ::= { mbgLtCfgEthernetIf3 2 }
| |
− |
| |
− | mbgLtCfgEthernetIf3IPv4Gateway OBJECT-TYPE
| |
− | SYNTAX DisplayString
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "The IPv4 gateway address of the fourth ethernet interface"
| |
− | ::= { mbgLtCfgEthernetIf3 3 }
| |
− |
| |
− |
| |
− | mbgLtCfgEthernetIf3DHCPClient OBJECT-TYPE
| |
− | SYNTAX INTEGER {
| |
− | disabled(0),
| |
− | enabled(1)
| |
− | }
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "Is DHCP used to get IP parameters for this interface"
| |
− | --- "1 = true, 2 = false"
| |
− | ::= { mbgLtCfgEthernetIf3 4 }
| |
− |
| |
− | mbgLtCfgEthernetIf3IPv6IP1 OBJECT-TYPE
| |
− | SYNTAX DisplayString
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "The first IPv6 address of the fourth ethernet interface"
| |
− | ::= { mbgLtCfgEthernetIf3 5 }
| |
− |
| |
− | mbgLtCfgEthernetIf3IPv6IP2 OBJECT-TYPE
| |
− | SYNTAX DisplayString
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "The second IPv6 address of the fourth ethernet interface"
| |
− | ::= { mbgLtCfgEthernetIf3 6 }
| |
− |
| |
− | mbgLtCfgEthernetIf3IPv6IP3 OBJECT-TYPE
| |
− | SYNTAX DisplayString
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "The third IPv6 address of the fourth ethernet interface"
| |
− | ::= { mbgLtCfgEthernetIf3 7 }
| |
− |
| |
− | mbgLtCfgEthernetIf3IPv6Autoconf OBJECT-TYPE
| |
− | SYNTAX INTEGER {
| |
− | disabled(0),
| |
− | enabled(1)
| |
− | }
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "Is IPv6 Autoconf used for this interface"
| |
− | --- "1 = true, 2 = false"
| |
− | ::= { mbgLtCfgEthernetIf3 8 }
| |
− |
| |
− | mbgLtCfgEthernetIf3NetLinkMode OBJECT-TYPE
| |
− | SYNTAX INTEGER {
| |
− | autosensing(0),
| |
− | link10half(1),
| |
− | link10full(2),
| |
− | link100half(3),
| |
− | link100full(4)
| |
− | }
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "Link mode for this interface"
| |
− |
| |
− | ::= { mbgLtCfgEthernetIf3 9 }
| |
− |
| |
− |
| |
− | mbgLtCfgEthernetIf4IPv4IP OBJECT-TYPE
| |
− | SYNTAX DisplayString
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "The IPv4 address of the fifth ethernet interface"
| |
− | ::= { mbgLtCfgEthernetIf4 1 }
| |
− |
| |
− | mbgLtCfgEthernetIf4IPv4Netmask OBJECT-TYPE
| |
− | SYNTAX DisplayString
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "The IPv4 netmask of the fifth ethernet interface"
| |
− | ::= { mbgLtCfgEthernetIf4 2 }
| |
− |
| |
− | mbgLtCfgEthernetIf4IPv4Gateway OBJECT-TYPE
| |
− | SYNTAX DisplayString
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "The IPv4 gateway address of the fifth ethernet interface"
| |
− | ::= { mbgLtCfgEthernetIf4 3 }
| |
− |
| |
− |
| |
− | mbgLtCfgEthernetIf4DHCPClient OBJECT-TYPE
| |
− | SYNTAX INTEGER {
| |
− | disabled(0),
| |
− | enabled(1)
| |
− | }
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "Is DHCP used to get IP parameters for this interface"
| |
− | --- "1 = true, 2 = false"
| |
− | ::= { mbgLtCfgEthernetIf4 4 }
| |
− |
| |
− | mbgLtCfgEthernetIf4IPv6IP1 OBJECT-TYPE
| |
− | SYNTAX DisplayString
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "The first IPv6 address of the fifth ethernet interface"
| |
− | ::= { mbgLtCfgEthernetIf4 5 }
| |
− |
| |
− | mbgLtCfgEthernetIf4IPv6IP2 OBJECT-TYPE
| |
− | SYNTAX DisplayString
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "The second IPv6 address of the fifth ethernet interface"
| |
− | ::= { mbgLtCfgEthernetIf4 6 }
| |
− |
| |
− | mbgLtCfgEthernetIf4IPv6IP3 OBJECT-TYPE
| |
− | SYNTAX DisplayString
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "The third IPv6 address of the fifth ethernet interface"
| |
− | ::= { mbgLtCfgEthernetIf4 7 }
| |
− |
| |
− | mbgLtCfgEthernetIf4IPv6Autoconf OBJECT-TYPE
| |
− | SYNTAX INTEGER {
| |
− | disabled(0),
| |
− | enabled(1)
| |
− | }
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "Is IPv6 Autoconf used for this interface"
| |
− | --- "1 = true, 2 = false"
| |
− | ::= { mbgLtCfgEthernetIf4 8 }
| |
− |
| |
− | mbgLtCfgEthernetIf4NetLinkMode OBJECT-TYPE
| |
− | SYNTAX INTEGER {
| |
− | autosensing(0),
| |
− | link10half(1),
| |
− | link10full(2),
| |
− | link100half(3),
| |
− | link100full(4)
| |
− | }
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "Link mode for this interface"
| |
− |
| |
− | ::= { mbgLtCfgEthernetIf4 9 }
| |
− |
| |
− |
| |
− | mbgLtCfgEthernetIf5IPv4IP OBJECT-TYPE
| |
− | SYNTAX DisplayString
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "The IPv4 address of the sixth ethernet interface"
| |
− | ::= { mbgLtCfgEthernetIf5 1 }
| |
− |
| |
− | mbgLtCfgEthernetIf5IPv4Netmask OBJECT-TYPE
| |
− | SYNTAX DisplayString
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "The IPv4 netmask of the sixth ethernet interface"
| |
− | ::= { mbgLtCfgEthernetIf5 2 }
| |
− |
| |
− | mbgLtCfgEthernetIf5IPv4Gateway OBJECT-TYPE
| |
− | SYNTAX DisplayString
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "The IPv4 gateway address of the sixth ethernet interface"
| |
− | ::= { mbgLtCfgEthernetIf5 3 }
| |
− |
| |
− |
| |
− | mbgLtCfgEthernetIf5DHCPClient OBJECT-TYPE
| |
− | SYNTAX INTEGER {
| |
− | disabled(0),
| |
− | enabled(1)
| |
− | }
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "Is DHCP used to get IP parameters for this interface"
| |
− | --- "1 = true, 2 = false"
| |
− | ::= { mbgLtCfgEthernetIf5 4 }
| |
− |
| |
− | mbgLtCfgEthernetIf5IPv6IP1 OBJECT-TYPE
| |
− | SYNTAX DisplayString
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "The first IPv6 address of the sixth ethernet interface"
| |
− | ::= { mbgLtCfgEthernetIf5 5 }
| |
− |
| |
− | mbgLtCfgEthernetIf5IPv6IP2 OBJECT-TYPE
| |
− | SYNTAX DisplayString
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "The second IPv6 address of the sixth ethernet interface"
| |
− | ::= { mbgLtCfgEthernetIf5 6 }
| |
− |
| |
− | mbgLtCfgEthernetIf5IPv6IP3 OBJECT-TYPE
| |
− | SYNTAX DisplayString
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "The third IPv6 address of the sixth ethernet interface"
| |
− | ::= { mbgLtCfgEthernetIf5 7 }
| |
− |
| |
− | mbgLtCfgEthernetIf5IPv6Autoconf OBJECT-TYPE
| |
− | SYNTAX INTEGER {
| |
− | disabled(0),
| |
− | enabled(1)
| |
− | }
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "Is IPv6 Autoconf used for this interface"
| |
− | --- "1 = true, 2 = false"
| |
− | ::= { mbgLtCfgEthernetIf5 8 }
| |
− |
| |
− | mbgLtCfgEthernetIf5NetLinkMode OBJECT-TYPE
| |
− | SYNTAX INTEGER {
| |
− | autosensing(0),
| |
− | link10half(1),
| |
− | link10full(2),
| |
− | link100half(3),
| |
− | link100full(4)
| |
− | }
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "Link mode for this interface"
| |
− |
| |
− | ::= { mbgLtCfgEthernetIf5 9 }
| |
− |
| |
− |
| |
− | mbgLtCfgEthernetIf6IPv4IP OBJECT-TYPE
| |
− | SYNTAX DisplayString
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "The IPv4 address of the seventh ethernet interface"
| |
− | ::= { mbgLtCfgEthernetIf6 1 }
| |
− |
| |
− | mbgLtCfgEthernetIf6IPv4Netmask OBJECT-TYPE
| |
− | SYNTAX DisplayString
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "The IPv4 netmask of the seventh ethernet interface"
| |
− | ::= { mbgLtCfgEthernetIf6 2 }
| |
− |
| |
− | mbgLtCfgEthernetIf6IPv4Gateway OBJECT-TYPE
| |
− | SYNTAX DisplayString
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "The IPv4 gateway address of the seventh ethernet interface"
| |
− | ::= { mbgLtCfgEthernetIf6 3 }
| |
− |
| |
− |
| |
− | mbgLtCfgEthernetIf6DHCPClient OBJECT-TYPE
| |
− | SYNTAX INTEGER {
| |
− | disabled(0),
| |
− | enabled(1)
| |
− | }
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "Is DHCP used to get IP parameters for this interface"
| |
− | --- "1 = true, 2 = false"
| |
− | ::= { mbgLtCfgEthernetIf6 4 }
| |
− |
| |
− | mbgLtCfgEthernetIf6IPv6IP1 OBJECT-TYPE
| |
− | SYNTAX DisplayString
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "The first IPv6 address of the seventh ethernet interface"
| |
− | ::= { mbgLtCfgEthernetIf6 5 }
| |
− |
| |
− | mbgLtCfgEthernetIf6IPv6IP2 OBJECT-TYPE
| |
− | SYNTAX DisplayString
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "The second IPv6 address of the seventh ethernet interface"
| |
− | ::= { mbgLtCfgEthernetIf6 6 }
| |
− |
| |
− | mbgLtCfgEthernetIf6IPv6IP3 OBJECT-TYPE
| |
− | SYNTAX DisplayString
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "The third IPv6 address of the seventh ethernet interface"
| |
− | ::= { mbgLtCfgEthernetIf6 7 }
| |
− |
| |
− | mbgLtCfgEthernetIf6IPv6Autoconf OBJECT-TYPE
| |
− | SYNTAX INTEGER {
| |
− | disabled(0),
| |
− | enabled(1)
| |
− | }
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "Is IPv6 Autoconf used for this interface"
| |
− | --- "1 = true, 2 = false"
| |
− | ::= { mbgLtCfgEthernetIf6 8 }
| |
− |
| |
− | mbgLtCfgEthernetIf6NetLinkMode OBJECT-TYPE
| |
− | SYNTAX INTEGER {
| |
− | autosensing(0),
| |
− | link10half(1),
| |
− | link10full(2),
| |
− | link100half(3),
| |
− | link100full(4)
| |
− | }
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "Link mode for this interface"
| |
− |
| |
− | ::= { mbgLtCfgEthernetIf6 9 }
| |
− |
| |
− |
| |
− | mbgLtCfgEthernetIf7IPv4IP OBJECT-TYPE
| |
− | SYNTAX DisplayString
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "The IPv4 address of the eighth ethernet interface"
| |
− | ::= { mbgLtCfgEthernetIf7 1 }
| |
− |
| |
− | mbgLtCfgEthernetIf7IPv4Netmask OBJECT-TYPE
| |
− | SYNTAX DisplayString
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "The IPv4 netmask of the eighth ethernet interface"
| |
− | ::= { mbgLtCfgEthernetIf7 2 }
| |
− |
| |
− | mbgLtCfgEthernetIf7IPv4Gateway OBJECT-TYPE
| |
− | SYNTAX DisplayString
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "The IPv4 gateway address of the eighth ethernet interface"
| |
− | ::= { mbgLtCfgEthernetIf7 3 }
| |
− |
| |
− |
| |
− | mbgLtCfgEthernetIf7DHCPClient OBJECT-TYPE
| |
− | SYNTAX INTEGER {
| |
− | disabled(0),
| |
− | enabled(1)
| |
− | }
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "Is DHCP used to get IP parameters for this interface"
| |
− | --- "1 = true, 2 = false"
| |
− | ::= { mbgLtCfgEthernetIf7 4 }
| |
− |
| |
− | mbgLtCfgEthernetIf7IPv6IP1 OBJECT-TYPE
| |
− | SYNTAX DisplayString
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "The first IPv6 address of the eighth ethernet interface"
| |
− | ::= { mbgLtCfgEthernetIf7 5 }
| |
− |
| |
− | mbgLtCfgEthernetIf7IPv6IP2 OBJECT-TYPE
| |
− | SYNTAX DisplayString
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "The second IPv6 address of the eighth ethernet interface"
| |
− | ::= { mbgLtCfgEthernetIf7 6 }
| |
− |
| |
− | mbgLtCfgEthernetIf7IPv6IP3 OBJECT-TYPE
| |
− | SYNTAX DisplayString
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "The third IPv6 address of the eighth ethernet interface"
| |
− | ::= { mbgLtCfgEthernetIf7 7 }
| |
− |
| |
− | mbgLtCfgEthernetIf7IPv6Autoconf OBJECT-TYPE
| |
− | SYNTAX INTEGER {
| |
− | disabled(0),
| |
− | enabled(1)
| |
− | }
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "Is IPv6 Autoconf used for this interface"
| |
− | --- "1 = true, 2 = false"
| |
− | ::= { mbgLtCfgEthernetIf7 8 }
| |
− |
| |
− | mbgLtCfgEthernetIf7NetLinkMode OBJECT-TYPE
| |
− | SYNTAX INTEGER {
| |
− | autosensing(0),
| |
− | link10half(1),
| |
− | link10full(2),
| |
− | link100half(3),
| |
− | link100full(4)
| |
− | }
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "Link mode for this interface"
| |
− |
| |
− | ::= { mbgLtCfgEthernetIf7 9 }
| |
− |
| |
− |
| |
− | mbgLtCfgEthernetIf8IPv4IP OBJECT-TYPE
| |
− | SYNTAX DisplayString
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "The IPv4 address of the nineth ethernet interface"
| |
− | ::= { mbgLtCfgEthernetIf8 1 }
| |
− |
| |
− | mbgLtCfgEthernetIf8IPv4Netmask OBJECT-TYPE
| |
− | SYNTAX DisplayString
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "The IPv4 netmask of the nineth ethernet interface"
| |
− | ::= { mbgLtCfgEthernetIf8 2 }
| |
− |
| |
− | mbgLtCfgEthernetIf8IPv4Gateway OBJECT-TYPE
| |
− | SYNTAX DisplayString
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "The IPv4 gateway address of the nineth ethernet interface"
| |
− | ::= { mbgLtCfgEthernetIf8 3 }
| |
− |
| |
− |
| |
− | mbgLtCfgEthernetIf8DHCPClient OBJECT-TYPE
| |
− | SYNTAX INTEGER {
| |
− | disabled(0),
| |
− | enabled(1)
| |
− | }
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "Is DHCP used to get IP parameters for this interface"
| |
− | --- "1 = true, 2 = false"
| |
− | ::= { mbgLtCfgEthernetIf8 4 }
| |
− |
| |
− | mbgLtCfgEthernetIf8IPv6IP1 OBJECT-TYPE
| |
− | SYNTAX DisplayString
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "The first IPv6 address of the nineth ethernet interface"
| |
− | ::= { mbgLtCfgEthernetIf8 5 }
| |
− |
| |
− | mbgLtCfgEthernetIf8IPv6IP2 OBJECT-TYPE
| |
− | SYNTAX DisplayString
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "The second IPv6 address of the nineth ethernet interface"
| |
− | ::= { mbgLtCfgEthernetIf8 6 }
| |
− |
| |
− | mbgLtCfgEthernetIf8IPv6IP3 OBJECT-TYPE
| |
− | SYNTAX DisplayString
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "The third IPv6 address of the nineth ethernet interface"
| |
− | ::= { mbgLtCfgEthernetIf8 7 }
| |
− |
| |
− | mbgLtCfgEthernetIf8IPv6Autoconf OBJECT-TYPE
| |
− | SYNTAX INTEGER {
| |
− | disabled(0),
| |
− | enabled(1)
| |
− | }
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "Is IPv6 Autoconf used for this interface"
| |
− | --- "1 = true, 2 = false"
| |
− | ::= { mbgLtCfgEthernetIf8 8 }
| |
− |
| |
− | mbgLtCfgEthernetIf8NetLinkMode OBJECT-TYPE
| |
− | SYNTAX INTEGER {
| |
− | autosensing(0),
| |
− | link10half(1),
| |
− | link10full(2),
| |
− | link100half(3),
| |
− | link100full(4)
| |
− | }
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "Link mode for this interface"
| |
− |
| |
− | ::= { mbgLtCfgEthernetIf8 9 }
| |
− |
| |
− |
| |
− | mbgLtCfgEthernetIf9IPv4IP OBJECT-TYPE
| |
− | SYNTAX DisplayString
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "The IPv4 address of the tenth ethernet interface"
| |
− | ::= { mbgLtCfgEthernetIf9 1 }
| |
− |
| |
− | mbgLtCfgEthernetIf9IPv4Netmask OBJECT-TYPE
| |
− | SYNTAX DisplayString
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "The IPv4 netmask of the tenth ethernet interface"
| |
− | ::= { mbgLtCfgEthernetIf9 2 }
| |
− |
| |
− | mbgLtCfgEthernetIf9IPv4Gateway OBJECT-TYPE
| |
− | SYNTAX DisplayString
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "The IPv4 gateway address of the tenth ethernet interface"
| |
− | ::= { mbgLtCfgEthernetIf9 3 }
| |
− |
| |
− |
| |
− | mbgLtCfgEthernetIf9DHCPClient OBJECT-TYPE
| |
− | SYNTAX INTEGER {
| |
− | disabled(0),
| |
− | enabled(1)
| |
− | }
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "Is DHCP used to get IP parameters for this interface"
| |
− | --- "1 = true, 2 = false"
| |
− | ::= { mbgLtCfgEthernetIf9 4 }
| |
− |
| |
− | mbgLtCfgEthernetIf9IPv6IP1 OBJECT-TYPE
| |
− | SYNTAX DisplayString
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "The first IPv6 address of the tenth ethernet interface"
| |
− | ::= { mbgLtCfgEthernetIf9 5 }
| |
− |
| |
− | mbgLtCfgEthernetIf9IPv6IP2 OBJECT-TYPE
| |
− | SYNTAX DisplayString
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "The second IPv6 address of the tenth ethernet interface"
| |
− | ::= { mbgLtCfgEthernetIf9 6 }
| |
− |
| |
− | mbgLtCfgEthernetIf9IPv6IP3 OBJECT-TYPE
| |
− | SYNTAX DisplayString
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "The third IPv6 address of the tenth ethernet interface"
| |
− | ::= { mbgLtCfgEthernetIf9 7 }
| |
− |
| |
− | mbgLtCfgEthernetIf9IPv6Autoconf OBJECT-TYPE
| |
− | SYNTAX INTEGER {
| |
− | disabled(0),
| |
− | enabled(1)
| |
− | }
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "Is IPv6 Autoconf used for this interface"
| |
− | --- "1 = true, 2 = false"
| |
− | ::= { mbgLtCfgEthernetIf9 8 }
| |
− |
| |
− | mbgLtCfgEthernetIf9NetLinkMode OBJECT-TYPE
| |
− | SYNTAX INTEGER {
| |
− | autosensing(0),
| |
− | link10half(1),
| |
− | link10full(2),
| |
− | link100half(3),
| |
− | link100full(4)
| |
− | }
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "Link mode for this interface"
| |
− |
| |
− | ::= { mbgLtCfgEthernetIf9 9 }
| |
− |
| |
− |
| |
− | --
| |
− | -- SHS specific parameters
| |
− | --
| |
− |
| |
− |
| |
− | mbgLtCfgSHS OBJECT IDENTIFIER ::= { mbgLtCfg 9 }
| |
− |
| |
− |
| |
− | mbgLtCfgSHSTimeLimit OBJECT-TYPE
| |
− | SYNTAX Integer32 (-2147483648..2147483647)
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "Max. number of seconds the two SHS references can differ before a SHS Timelimit error is issued"
| |
− | ::= { mbgLtCfgSHS 1 }
| |
− |
| |
− |
| |
− | --
| |
− | -- NDT specific parameters
| |
− | --
| |
− |
| |
− | mbgLtCfgNDT OBJECT IDENTIFIER ::= { mbgLtCfg 10 }
| |
− |
| |
− | mbgLtCfgNDTMode OBJECT-TYPE
| |
− | SYNTAX INTEGER {
| |
− | master(0),
| |
− | slave(1)
| |
− | }
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "Operation mode of LANTIME NDT "
| |
− | --- "0 = NDT is operating as a master server, 1 = NDT is operating as a slave server"
| |
− | ::= { mbgLtCfgNDT 1 }
| |
− |
| |
− |
| |
− |
| |
− | --
| |
− | -- Lantime SNMP commands
| |
− | --
| |
− |
| |
− | mbgLtCmd OBJECT IDENTIFIER ::= { mbgLantime 5 }
| |
− |
| |
− | mbgLtCmdExecute OBJECT-TYPE
| |
− | SYNTAX INTEGER {
| |
− | ready(0),
| |
− | doReboot(1),
| |
− | doFirmwareUpdate (2),
| |
− | doReloadConfig (3),
| |
− | doGenerateSSHKey (4),
| |
− | doGenerateHTTPSKey (5),
| |
− | doResetFactoryDefaults (6),
| |
− | doGenerateNewNTPAutokeyCert (7),
| |
− | doSendTestNotification (8),
| |
− | doResetSHSTimeLimitError (9)
| |
− | }
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "Send a command to the timeserver to be executed"
| |
− |
| |
− | ::={ mbgLtCmd 1 }
| |
− |
| |
− | mbgLtCmdSetRefTime OBJECT-TYPE
| |
− | SYNTAX DisplayString
| |
− | MAX-ACCESS read-write
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "Set the time of the reference clock and the LANTIME itself"
| |
− | -- The new time has to be specified in UTC time and
| |
− | -- can be either written as a valid ISO8601 date and time string
| |
− | -- e.g. 2006-08-23 16:05:30 (=08/23/2006, 4:05:30pm)
| |
− | -- or a simple number representing the number of seconds
| |
− | -- since 01/01/1970
| |
− |
| |
− | ::={ mbgLtCmd 2 }
| |
− |
| |
− |
| |
− | mbgLtConformance OBJECT IDENTIFIER ::= { mbgLantime 90 }
| |
− | mbgLtCompliances OBJECT IDENTIFIER ::= { mbgLtConformance 1 }
| |
− | mbgLtGroups OBJECT IDENTIFIER ::= { mbgLtConformance 2 }
| |
− |
| |
− | mbgLtCompliance MODULE-COMPLIANCE
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "The compliance statement for SNMP entities which implement version 2
| |
− | of the LANTIME MIB"
| |
− | MODULE -- this module
| |
− | MANDATORY-GROUPS {
| |
− | mbgLtObjectsGroup,
| |
− | mbgLtTrapsGroup
| |
− | }
| |
− | ::= { mbgLtCompliances 1 }
| |
− |
| |
− |
| |
− | mbgLtObjectsGroup OBJECT-GROUP
| |
− | OBJECTS {
| |
− | mbgLtCmdExecute,
| |
− | mbgLtCmdSetRefTime,
| |
− | mbgLtCfgNDTMode,
| |
− | mbgLtCfgSHSTimeLimit,
| |
− | mbgLtCfgEthernetIf9NetLinkMode,
| |
− | mbgLtCfgEthernetIf9IPv6Autoconf,
| |
− | mbgLtCfgEthernetIf9IPv6IP3,
| |
− | mbgLtCfgEthernetIf9IPv6IP2,
| |
− | mbgLtCfgEthernetIf9IPv6IP1,
| |
− | mbgLtCfgEthernetIf9DHCPClient,
| |
− | mbgLtCfgEthernetIf9IPv4Gateway,
| |
− | mbgLtCfgEthernetIf9IPv4Netmask,
| |
− | mbgLtCfgEthernetIf9IPv4IP,
| |
− | mbgLtCfgEthernetIf8NetLinkMode,
| |
− | mbgLtCfgEthernetIf8IPv6Autoconf,
| |
− | mbgLtCfgEthernetIf8IPv6IP3,
| |
− | mbgLtCfgEthernetIf8IPv6IP2,
| |
− | mbgLtCfgEthernetIf8IPv6IP1,
| |
− | mbgLtCfgEthernetIf8DHCPClient,
| |
− | mbgLtCfgEthernetIf8IPv4Gateway,
| |
− | mbgLtCfgEthernetIf8IPv4Netmask,
| |
− | mbgLtCfgEthernetIf8IPv4IP,
| |
− | mbgLtCfgEthernetIf7NetLinkMode,
| |
− | mbgLtCfgEthernetIf7IPv6Autoconf,
| |
− | mbgLtCfgEthernetIf7IPv6IP3,
| |
− | mbgLtCfgEthernetIf7IPv6IP2,
| |
− | mbgLtCfgEthernetIf7IPv6IP1,
| |
− | mbgLtCfgEthernetIf7DHCPClient,
| |
− | mbgLtCfgEthernetIf7IPv4Gateway,
| |
− | mbgLtCfgEthernetIf7IPv4Netmask,
| |
− | mbgLtCfgEthernetIf7IPv4IP,
| |
− | mbgLtCfgEthernetIf6NetLinkMode,
| |
− | mbgLtCfgEthernetIf6IPv6Autoconf,
| |
− | mbgLtCfgEthernetIf6IPv6IP3,
| |
− | mbgLtCfgEthernetIf6IPv6IP2,
| |
− | mbgLtCfgEthernetIf6IPv6IP1,
| |
− | mbgLtCfgEthernetIf6DHCPClient,
| |
− | mbgLtCfgEthernetIf6IPv4Gateway,
| |
− | mbgLtCfgEthernetIf6IPv4Netmask,
| |
− | mbgLtCfgEthernetIf6IPv4IP,
| |
− | mbgLtCfgEthernetIf5NetLinkMode,
| |
− | mbgLtCfgEthernetIf5IPv6Autoconf,
| |
− | mbgLtCfgEthernetIf5IPv6IP3,
| |
− | mbgLtCfgEthernetIf5IPv6IP2,
| |
− | mbgLtCfgEthernetIf5IPv6IP1,
| |
− | mbgLtCfgEthernetIf5DHCPClient,
| |
− | mbgLtCfgEthernetIf5IPv4Gateway,
| |
− | mbgLtCfgEthernetIf5IPv4Netmask,
| |
− | mbgLtCfgEthernetIf5IPv4IP,
| |
− | mbgLtCfgEthernetIf4NetLinkMode,
| |
− | mbgLtCfgEthernetIf4IPv6Autoconf,
| |
− | mbgLtCfgEthernetIf4IPv6IP3,
| |
− | mbgLtCfgEthernetIf4IPv6IP2,
| |
− | mbgLtCfgEthernetIf4IPv6IP1,
| |
− | mbgLtCfgEthernetIf4DHCPClient,
| |
− | mbgLtCfgEthernetIf4IPv4Gateway,
| |
− | mbgLtCfgEthernetIf4IPv4Netmask,
| |
− | mbgLtCfgEthernetIf4IPv4IP,
| |
− | mbgLtCfgEthernetIf3NetLinkMode,
| |
− | mbgLtCfgEthernetIf3IPv6Autoconf,
| |
− | mbgLtCfgEthernetIf3IPv6IP3,
| |
− | mbgLtCfgEthernetIf3IPv6IP2,
| |
− | mbgLtCfgEthernetIf3IPv6IP1,
| |
− | mbgLtCfgEthernetIf3DHCPClient,
| |
− | mbgLtCfgEthernetIf3IPv4Gateway,
| |
− | mbgLtCfgEthernetIf3IPv4Netmask,
| |
− | mbgLtCfgEthernetIf3IPv4IP,
| |
− | mbgLtCfgEthernetIf2NetLinkMode,
| |
− | mbgLtCfgEthernetIf2IPv6Autoconf,
| |
− | mbgLtCfgEthernetIf2IPv6IP3,
| |
− | mbgLtCfgEthernetIf2IPv6IP2,
| |
− | mbgLtCfgEthernetIf2IPv6IP1,
| |
− | mbgLtCfgEthernetIf2DHCPClient,
| |
− | mbgLtCfgEthernetIf2IPv4Gateway,
| |
− | mbgLtCfgEthernetIf2IPv4Netmask,
| |
− | mbgLtCfgEthernetIf2IPv4IP,
| |
− | mbgLtCfgEthernetIf1NetLinkMode,
| |
− | mbgLtCfgEthernetIf1IPv6Autoconf,
| |
− | mbgLtCfgEthernetIf1IPv6IP3,
| |
− | mbgLtCfgEthernetIf1IPv6IP2,
| |
− | mbgLtCfgEthernetIf1IPv6IP1,
| |
− | mbgLtCfgEthernetIf1DHCPClient,
| |
− | mbgLtCfgEthernetIf1IPv4Gateway,
| |
− | mbgLtCfgEthernetIf1IPv4Netmask,
| |
− | mbgLtCfgEthernetIf1IPv4IP,
| |
− | mbgLtCfgEthernetIf0NetLinkMode,
| |
− | mbgLtCfgEthernetIf0IPv6Autoconf,
| |
− | mbgLtCfgEthernetIf0IPv6IP3,
| |
− | mbgLtCfgEthernetIf0IPv6IP2,
| |
− | mbgLtCfgEthernetIf0IPv6IP1,
| |
− | mbgLtCfgEthernetIf0DHCPClient,
| |
− | mbgLtCfgEthernetIf0IPv4Gateway,
| |
− | mbgLtCfgEthernetIf0IPv4Netmask,
| |
− | mbgLtCfgEthernetIf0IPv4IP,
| |
− | mbgLtCfgNotifyLeapSecond,
| |
− | mbgLtCfgNotifySHSTimeLimitError,
| |
− | mbgLtCfgNotifyConfigChanged,
| |
− | mbgLtCfgNotifyAntennaReconnect,
| |
− | mbgLtCfgNotifyAntennaFaulty,
| |
− | mbgLtCfgNotifyRefclockNotSync,
| |
− | mbgLtCfgNotifyRefclkNoResponse,
| |
− | mbgLtCfgNotifyServerBoot,
| |
− | mbgLtCfgNotifyNTPStopped,
| |
− | mbgLtCfgNotifyNTPNotSync,
| |
− | mbgLtCfgVP100Display2SN,
| |
− | mbgLtCfgVP100Display2IP,
| |
− | mbgLtCfgVP100Display1SN,
| |
− | mbgLtCfgVP100Display1IP,
| |
− | mbgLtCfgWMailAddress2,
| |
− | mbgLtCfgWMailAddress1,
| |
− | mbgLtCfgSNMPLocation,
| |
− | mbgLtCfgSNMPContact,
| |
− | mbgLtCfgSNMPReadWriteCommunity,
| |
− | mbgLtCfgSNMPReadOnlyCommunity,
| |
− | mbgLtCfgSNMPTrapRec2Community,
| |
− | mbgLtCfgSNMPTrapRec1Community,
| |
− | mbgLtCfgSNMPTrapReceiver2,
| |
− | mbgLtCfgSNMPTrapReceiver1,
| |
− | mbgLtCfgEMailSmarthost,
| |
− | mbgLtCfgEMailFrom,
| |
− | mbgLtCfgEMailTo,
| |
− | mbgLtCfgNTPAtomPPS,
| |
− | mbgLtCfgNTPAutokeyFeature,
| |
− | mbgLtCfgNTPBroadcastAutokey,
| |
− | mbgLtCfgNTPBroadcastKey,
| |
− | mbgLtCfgNTPBroadcastIP,
| |
− | mbgLtCfgNTPTrustedKey,
| |
− | mbgLtCfgNTPStratumLocalClock,
| |
− | mbgLtCfgNTPServer1Autokey,
| |
− | mbgLtCfgNTPServer1Key,
| |
− | mbgLtCfgNTPServer1IP,
| |
− | mbgLtCfgNTPServer1Prefer,
| |
− | mbgLtCfgNTPServer2Autokey,
| |
− | mbgLtCfgNTPServer2Key,
| |
− | mbgLtCfgNTPServer2IP,
| |
− | mbgLtCfgNTPServer2Prefer,
| |
− | mbgLtCfgNTPServer3Autokey,
| |
− | mbgLtCfgNTPServer3Key,
| |
− | mbgLtCfgNTPServer3IP,
| |
− | mbgLtCfgNTPServer3Prefer,
| |
− | mbgLtCfgNTPServer4Autokey,
| |
− | mbgLtCfgNTPServer4Key,
| |
− | mbgLtCfgNTPServer4IP,
| |
− | mbgLtCfgNTPServer4Prefer,
| |
− | mbgLtCfgNTPServer5Autokey,
| |
− | mbgLtCfgNTPServer5Key,
| |
− | mbgLtCfgNTPServer5IP,
| |
− | mbgLtCfgNTPServer5Prefer,
| |
− | mbgLtCfgNTPServer6Autokey,
| |
− | mbgLtCfgNTPServer6Key,
| |
− | mbgLtCfgNTPServer6IP,
| |
− | mbgLtCfgNTPServer6Prefer,
| |
− | mbgLtCfgNTPServer7Autokey,
| |
− | mbgLtCfgNTPServer7Key,
| |
− | mbgLtCfgNTPServer7IP,
| |
− | mbgLtCfgNTPServer7Prefer,
| |
− | mbgLtCfgSSHAccess,
| |
− | mbgLtCfgIPv6Access,
| |
− | mbgLtCfgSambaAccess,
| |
− | mbgLtCfgSNMPAccess,
| |
− | mbgLtCfgHTTPSAccess,
| |
− | mbgLtCfgHTTPAccess,
| |
− | mbgLtCfgFTPAccess,
| |
− | mbgLtCfgTelnetAccess,
| |
− | mbgLtCfgSyslogserver2,
| |
− | mbgLtCfgSyslogserver1,
| |
− | mbgLtCfgNameserver2,
| |
− | mbgLtCfgNameserver1,
| |
− | mbgLtCfgDomainname,
| |
− | mbgLtCfgHostname,
| |
− | mbgLtRefDctModeVal,
| |
− | mbgLtRefDctMode,
| |
− | mbgLtRefDctField,
| |
− | mbgLtRefDctStateVal,
| |
− | mbgLtRefDctState,
| |
− | mbgLtRefSHSTimeDiff,
| |
− | mbgLtRefSHSModeVal,
| |
− | mbgLtRefSHSMode,
| |
− | mbgLtRefIrigStateVal,
| |
− | mbgLtRefIrigState,
| |
− | mbgLtRefPzfModeVal,
| |
− | mbgLtRefPzfMode,
| |
− | mbgLtRefIrigModeVal,
| |
− | mbgLtRefIrigMode,
| |
− | mbgLtRefGpsModeVal,
| |
− | mbgLtRefGpsMode,
| |
− | mbgLtRefPzfField,
| |
− | mbgLtRefPzfKorrelation,
| |
− | mbgLtRefPzfStateVal,
| |
− | mbgLtRefPzfState,
| |
− | mbgLtRefGpsSatellitesInView,
| |
− | mbgLtRefGpsSatellitesGood,
| |
− | mbgLtRefGpsSatellites,
| |
− | mbgLtRefGpsPosition,
| |
− | mbgLtRefGpsStateVal,
| |
− | mbgLtRefGpsState,
| |
− | mbgLtRefClockModeVal,
| |
− | mbgLtRefClockMode,
| |
− | mbgLtRefClockTypeVal,
| |
− | mbgLtRefClockType,
| |
− | mbgLtNtpVersion,
| |
− | mbgLtNtpAuthKeyId,
| |
− | mbgLtNtpNumberOfRefclocks,
| |
− | mbgLtNtpActiveRefclockOffsetVal,
| |
− | mbgLtNtpActiveRefclockOffset,
| |
− | mbgLtNtpActiveRefclockName,
| |
− | mbgLtNtpActiveRefclockId,
| |
− | mbgLtNtpStratum,
| |
− | mbgLtNtpCurrentStateVal,
| |
− | mbgLtNtpCurrentState,
| |
− | mbgLtFirmwareVersionVal,
| |
− | mbgLtFirmwareVersion,
| |
− | mbgLtTrapMessage
| |
− | }
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "The collection of objects for the LANTIME MIB"
| |
− | ::= { mbgLtGroups 1 }
| |
− |
| |
− | mbgLtTrapsGroup NOTIFICATION-GROUP
| |
− | NOTIFICATIONS {
| |
− | mbgLtTrapTestNotification,
| |
− | mbgLtTrapPowerSupplyFailure,
| |
− | mbgLtTrapAntennaShortCircuit,
| |
− | mbgLtTrapNormalOperation,
| |
− | mbgLtTrapHeartbeat,
| |
− | mbgLtTrapSecondaryRecNotSync,
| |
− | mbgLtTrapSHSTimeLimitError,
| |
− | mbgLtTrapLeapSecondAnnounced,
| |
− | mbgLtTrapConfigChanged,
| |
− | mbgLtTrapAntennaReconnect,
| |
− | mbgLtTrapAntennaFaulty,
| |
− | mbgLtTrapReceiverNotSync,
| |
− | mbgLtTrapReceiverNotResponding,
| |
− | mbgLtTrapServerBoot,
| |
− | mbgLtTrapNTPStopped,
| |
− | mbgLtTrapNTPNotSync
| |
− | }
| |
− | STATUS current
| |
− | DESCRIPTION
| |
− | "The collection of traps for the LANTIME MIB"
| |
− | ::= { mbgLtGroups 2 }
| |
− |
| |
− | END
| |
| | | |
| ==== Example handler script ==== | | ==== Example handler script ==== |
By default, snmptrapd does not do anything with received notifications. You have to tell it what you want to receive notifications.
To receive SNMPv1 or SNMPv2c notifications you need to tell snmptrapd your community strings. The easiest way to do this is by using the authCommunity snmptrapd.conf configuration file token. For example, this line:
Will let snmptrapd process notifications received using the "public" community string. Those notifications may be logged, allowed to trigger executable actions (see below), and resend data to the network (forward).
SNMPv3 adds security to the SNMP protocol and is a safer way to receive notification data. But, it's a bit more complex to set up. Configuration of SNMPv3 notifications is described fully on a separate page:
Generating traps is only half of the battle. We also need something
to receive the notification, and respond accordingly.
The Net-SNMP suite includes an application snmptrapd
which can accept and process such notifications.
respectively.
The snmptrapd utility also has the ability to execute other programs on the reception
of a trap. This is controlled by the traphandle directive, with the syntax
Notice, that this only takes an OID to determine which trap (or notification) is received. This means that SNMPv1 traps, which have a trap type and specific type, need to be represented in SNMPv2 format, which is described in RFC 2089.
SNMPv2 traps and informs are much easier, because they include the correct OID in the SNMPv2-MIB::snmpTrapOID.0 variable in the trap.
The command specifies a command to be executed by snmptrapd upon reception by the command. This command is executed with the data of the trap as its standard input. The first line is the host name, the second the IP address of the trap sender, and the following lines consists of an OID VALUE pair with the data from the received trap.
These tutorial links talk about SNMP generically and how the protocol itself works. They are good introductory reading material and the concepts are important to understand before diving into the later tutorials about Net-SNMP itself.
These tutorial pages discuss the command line tools provided in the Net-SNMP suite of tools. Nearly all the example commands in these tutorials works if you try it yourself, as they're all examples that talk to our online Net-SNMP test agent. Given them a shot!
All of our applications support configuration to allow you to customize how they behave.
Net-SNMP comes with a highly flexible and extensible API. The API allows you to create your own commands, add extensions to the agent to support your own MIBs and perform specialized processing of notifications.
All our tools and applications have extensive debugging output. These tutorials talk about how the debugging system works and how you can add your own debugging statements to you code: