TUT:snmptable
Although snmpwalk can be used to retrieve the contents of a table, it will list the results for each column in turn. This is not how most people would naturally expect to see a table displayed. That's where snmptable comes in.
Contents
Basic usage
The snmptable command retrieves the contents of an SNMP table, and displays it in the usual manner - one row at a time:
% snmptable -v 2c -c demopublic -Os test.net-snmp.org sysORTable
SNMP table: sysORTable
sysORID sysORDescr sysORUpTime
snmpMIB The Mib module for SNMPv2 entities. 0:0:00:00.00
vacmBasicGroup View-based Access Control Model for SNMP. 0:0:00:00.00
snmpFrameworkMIBCompliance The SNMP Management Architecture MIB. 0:0:00:00.00
snmpMPDCompliance The MIB for Message Processing and Dispatching. 0:0:00:00.00
usmMIBCompliance The MIB for the SNMP User-based Security Model. 0:0:00:00.00
The headings for the table columns (and the name of the table itself) can be omitted using the -Ch flag.
Wide Tables
This particular table only has a few columns (and the description strings shown here are relatively short, deliberately). In practise, the output for many tables can be too wide to be handled sensibly.
Fortunately, snmptable can apply a maximum width to the output, splitting the table into several chunks if necessary:
% snmptable -v 2c -c demopublic -Os -Cw 80 test.net-snmp.org sysORTable
SNMP table: sysORTable
sysORID sysORDescr
snmpMIB The Mib module for SNMPv2 entities.
vacmBasicGroup View-based Access Control Model for SNMP.
snmpFrameworkMIBCompliance The SNMP Management Architecture MIB.
snmpMPDCompliance The MIB for Message Processing and Dispatching.
usmMIBCompliance The MIB for the SNMP User-based Security Model.
SNMP table: sysORTable, part 2
sysORUpTime
0:0:00:00.00
0:0:00:00.00
0:0:00:00.00
0:0:00:00.00
0:0:00:00.00
Table Indexes
Holes in Tables
Specifying the OID
Tutorial Sections
About the SNMP Protocol
These tutorial links talk about SNMP generically and how the protocol itself works. They are good introductory reading material and the concepts are important to understand before diving into the later tutorials about Net-SNMP itself.
- How SNMP Works: About the protocol itself (GETs, GETNEXTs, etc)
- What data is in SNMP: All about SNMP Management Information Bases (MIBs)
- Securing SNMP: How to use the SNMP protocol securely
Net-SNMP Command Line Applications
These tutorial pages discuss the command line tools provided in the Net-SNMP suite of tools. Nearly all the example commands in these tutorials works if you try it yourself, as they're all examples that talk to our online Net-SNMP test agent. Given them a shot!
- snmptranslate: learning about the MIB tree.
- snmpget: retrieving data from a host.
- snmpgetnext: retrieving unknown indexed data.
- snmpwalk: retrieving lots of data at once!
- snmptable: displaying a table.
- snmpset: peforming write operations.
- snmpbulkget: communicates with a network entity using SNMP GETBULK request
- snmpbulkwalk: retrieve a sub-tree of management values using SNMP GETBULK requests.
- snmptrap: Sending and receiving traps, and acting upon them.
- Traps/informs with SNMPv3/USM: Sending and receiving SNMPv3/USM TRAPs and INFORMs
- Sending Traps/Informs via AgentX: Sending notifications from the command line through snmpd
- Common command line options:
- Writing mib2c config files
Application Configuration
All of our applications support configuration to allow you to customize how they behave.
Net-SNMP Daemons
Net-SNMP comes with two long-running daemons: a SNMP agent (snmpd) for responding to management requests and a notification receiver (snmptrapd) for receiving SNMP notifications.
- SNMP Agent (snmpd) Configuration
- SNMP Notification Receiver (snmptrapd)
- Agent Monitoring
Coding Tutorials
Net-SNMP comes with a highly flexible and extensible API. The API allows you to create your own commands, add extensions to the agent to support your own MIBs and perform specialized processing of notifications.
- Client / Manager Coding Tutorials
- Agent Coding Tutorials
- The Agent Architecture page might be worth reading before or after the agent coding tutorials, and describes how the Agent Helpers work under the hood.
- Writing a mib module to serve information described by an SNMP MIB, and how to compile it into the net-snmp snmpd agent.
- Writing a Dynamically Loadable Object that can be loaded into the SNMP agent.
- Writing a Subagent that can be run to attach to the snmpd master agent.
- Writing a perl plugin to extend the agent using the NetSNMP::agent module.
- Writing shell scripts to extend the agent
- Using mib2c to help write an agent code template for you
- Header files and autoconf
Debugging SNMP Applications and Agents
All our tools and applications have extensive debugging output. These tutorials talk about how the debugging system works and how you can add your own debugging statements to you code:
- Debugging output printed using the -D command line option
- Using -Ddump to display packet breakdowns
- Debugging using GDB
Operating System Specific Tutorials
- Building With Visual Studio 2005 Express
- Building Net-SNMP 64-bit with Visual C++ 2010 Express
- Net-Snmp on Ubuntu
- Net-SNMP and lm-sensors on Ubuntu 10.04
- Net-SNMP for windows:
