TUT:snmptable
Contents
snmptable
The snmptable command nicely displays a SNMP table for you in an easy to read column based fashion. Consider the sysORTable, which you saw all the data from in the last section. It's hard to get a good feel about the correlation of data when its displayed in a long list, like the output of snmpwalk gives you. Instead, snmptable nicely formats it for you (though sometimes it can be a bit wide, like in this example):
% snmptable -v 2c -c demopublic test.net-snmp.org sysORTable
SNMP table: system.sysORTable
sysORIndex sysORID sysORDescr sysORUpTime
1 .iso.org.dod.internet.snmpV2.snmpModules.snmpMIB The Mib module for SNMPv2 entities. 0:0:00:00.00
2 .iso.org.dod.internet.snmpV2.snmpModules.snmpVacmMIB.vacmMIBConformance.vacmMIBGroups.vacmBasicGroup View-based Access Control Model for SNMP. 0:0:00:00.00
3 .iso.org.dod.internet.snmpV2.snmpModules.snmpFrameworkMIB.snmpFrameworkMIBConformance.snmpFrameworkMIBCompliances.snmpFrameworkMIBCompliance The SNMP Management Architecture MIB. 0:0:00:00.00
4 .iso.org.dod.internet.snmpV2.snmpModules.snmpMPDMIB.snmpMPDMIBConformance.snmpMPDMIBCompliances.snmpMPDCompliance The MIB for Message Processing and Dispatching. 0:0:00:00.00
5 .iso.org.dod.internet.snmpV2.snmpModules.snmpUsmMIB.usmMIBConformance.usmMIBCompliances.usmMIBCompliance The management information definitions for the SNMP User-based Security Model. 0:0:00:00.00
But you can adjust the width of the table
% snmptable -v 2c -c demopublic -Cw 80 test.net-snmp.org sysORTable
SNMP table: system.sysORTable
sysORIndex sysORID
1 .iso.org.dod.internet.snmpV2.snmpModules.snmpMIB
2 .iso.org.dod.internet.snmpV2.snmpModules.snmpVacmMIB.vacmMIBConformance.vacmMIBGroups.vacmBasicGroup
3 .iso.org.dod.internet.snmpV2.snmpModules.snmpFrameworkMIB.snmpFrameworkMIBConformance.snmpFrameworkMIBCompliances.snmpFrameworkMIBCompliance
4 .iso.org.dod.internet.snmpV2.snmpModules.snmpMPDMIB.snmpMPDMIBConformance.snmpMPDMIBCompliances.snmpMPDCompliance
5 .iso.org.dod.internet.snmpV2.snmpModules.snmpUsmMIB.usmMIBConformance.usmMIBCompliances.usmMIBCompliance
SNMP table: system.sysORTable, part 2
sysORDescr sysORUpTime
The Mib module for SNMPv2 entities. 0:0:00:00.00
View-based Access Control Model for SNMP. 0:0:00:00.00
The SNMP Management Architecture MIB. 0:0:00:00.00
The MIB for Message Processing and Dispatching. 0:0:00:00.00
The management information definitions for the SNMP User-based Security Model. 0:0:00:00.00
Tutorial Sections
About the SNMP Protocol
These tutorial links talk about SNMP generically and how the protocol itself works. They are good introductory reading material and the concepts are important to understand before diving into the later tutorials about Net-SNMP itself.
- How SNMP Works: About the protocol itself (GETs, GETNEXTs, etc)
- What data is in SNMP: All about SNMP Management Information Bases (MIBs)
- Securing SNMP: How to use the SNMP protocol securely
Net-SNMP Command Line Applications
These tutorial pages discuss the command line tools provided in the Net-SNMP suite of tools. Nearly all the example commands in these tutorials works if you try it yourself, as they're all examples that talk to our online Net-SNMP test agent. Given them a shot!
- snmptranslate: learning about the MIB tree.
- snmpget: retrieving data from a host.
- snmpgetnext: retrieving unknown indexed data.
- snmpwalk: retrieving lots of data at once!
- snmptable: displaying a table.
- snmpset: peforming write operations.
- snmpbulkget: communicates with a network entity using SNMP GETBULK request
- snmpbulkwalk: retrieve a sub-tree of management values using SNMP GETBULK requests.
- snmptrap: Sending and receiving traps, and acting upon them.
- Traps/informs with SNMPv3/USM: Sending and receiving SNMPv3/USM TRAPs and INFORMs
- Sending Traps/Informs via AgentX: Sending notifications from the command line through snmpd
- Common command line options:
- Writing mib2c config files
Application Configuration
All of our applications support configuration to allow you to customize how they behave.
Net-SNMP Daemons
Net-SNMP comes with two long-running daemons: a SNMP agent (snmpd) for responding to management requests and a notification receiver (snmptrapd) for receiving SNMP notifications.
- SNMP Agent (snmpd) Configuration
- SNMP Notification Receiver (snmptrapd)
- Agent Monitoring
Coding Tutorials
Net-SNMP comes with a highly flexible and extensible API. The API allows you to create your own commands, add extensions to the agent to support your own MIBs and perform specialized processing of notifications.
- Client / Manager Coding Tutorials
- Agent Coding Tutorials
- The Agent Architecture page might be worth reading before or after the agent coding tutorials, and describes how the Agent Helpers work under the hood.
- Writing a mib module to serve information described by an SNMP MIB, and how to compile it into the net-snmp snmpd agent.
- Writing a Dynamically Loadable Object that can be loaded into the SNMP agent.
- Writing a Subagent that can be run to attach to the snmpd master agent.
- Writing a perl plugin to extend the agent using the NetSNMP::agent module.
- Writing shell scripts to extend the agent
- Using mib2c to help write an agent code template for you
- Header files and autoconf
Debugging SNMP Applications and Agents
All our tools and applications have extensive debugging output. These tutorials talk about how the debugging system works and how you can add your own debugging statements to you code:
- Debugging output printed using the -D command line option
- Using -Ddump to display packet breakdowns
- Debugging using GDB
Operating System Specific Tutorials
- Building With Visual Studio 2005 Express
- Building Net-SNMP 64-bit with Visual C++ 2010 Express
- Net-Snmp on Ubuntu
- Net-SNMP and lm-sensors on Ubuntu 10.04
- Net-SNMP for windows:
