Containers

Some (incomplete) ramblings about netsnmp_containers...

Introduction

Containers are a generic data interface, similar to a database. Like a database, you use an index (aka key) to access and sort the data. Containers use a compare function provided by the user to determine the sort order. The function is called with a pointer to two data items, and must return a value indicating which of the two has the lesser index value.

Types of Containers

There are several base types of containers:

• sorted_singly_linked_list
• unsorted_singly_linked_list
• lifo (a last in, first out stack)
• fifo (a first in, first out stack)
• binary_array
• null (for testing)

Some of these have aliases:

• table_container (binary_array)
• linked_list (sorted_singly_linked_list)
• ssll_container (sorted_singly_linked_list)

Some types also come with a comparison routine other than the usual OID index:

• string or string:binary_array (binary_array with a string comparison function)

Developer Tip:
 New types are registered via netsnmp_container_register() and netsnmp_container_register_with_compare().

Getting a Container

To get a container of a particular type,

netsnmp_container_find("type1:type2");

This will search for a container of "type1", and if not found, of "type2". It is a good idea to specify a custom name each time that you use a container. In the future, it will be possible to specify that certain tokens should map to certain container types. For example, say you are using a container while implementing the XyzWidgetMib, and you wanted to use a linked list, you could create your container like so:

container = netsnmp_container_find("XyzWidgetMib:linked_list");

This would use a linked list container, and (once implemented), allow runtime-configuration to change the container type to a binary array, should the linked list perform poorly with a large data set.

MIB indexes vs Container indexes

SNMP tables have indexes. A table index may have multiple components which, taken together, uniquely identify a row.

Now, when the two are used together, it easy to get confused. All of the MIB indexes, taken together, are the primary container index. Even if a MIB table has a dozen indexes, the container only has one.

To clarify futher, here's an example. Let's say we are creating a SNMP interface to a hotel reservation system. The (simplified) table looks like this:

guestTable

 guestEntry INDEX { building, room }
   building INTEGER
   room     INTEGER
   name     STRING

So, the MIB has two indexes, the building and room numbers. The primary MIB index is the building, and the secondary MIB index is the room. However, the primary index of the container will be the combined index OIDs (building.room).

Comparison routines

The default compare routine for containers assumes that the data record's first component is a netsnmp_index, so when using an OID as a key, you don't need to provide a comparison routine. By providing a second compare function, you can to access the data in a different order. If you wanted to provide your own compare routine, the primary container index compare function might look something like this:

 int
 _compare_room(guestTable *lh_guest, guestTable *rh_guests)
 {
   /* compare building, then room */
   if(lh_guest->building == rh_guest->building) {
       if(lh_guest->room == rh_guest->room)
          return 0;
       else {
          if(lh_guest->room < rh_guest->room)
             return -1;
          else
             return 1;
       }
   }
   else {
      if(lh_guest->building < rh_guest->building)
        return -1;
      else
        return 1;
   }
 }

So we now have a container with the guest data, and we can look up data by building and room number.

netsnmp_container *
netsnmp_container_init(void)
{
    netsnmp_container *container;

    container = netsnmp_container_find("guest room:table_container");
    if (NULL == container)
        return NULL;
    container->container_name = strdup("room container");
    container->compare = (netsnmp_container_compare*)_compare_room;

    return container;
}

Subcontainers

A container can have a sub-container. There are two types of sub-containers: secondary indexes, and subsets.

Secondary Indexes

So we now have a container with the guest data, and we can look up data by building and room number. What if our application now needs to generate a guest report, but sorted by name? We have the data, but in the wrong sort order. This is where you would use a secondary index to the container. The new compare might look like this:

int
_compare_names(guestTable *lh_guest, guestTable *rh_guests)
{
   /* compare name, then building and room */
   int rc = strcmp(lh_guest->name,rh_guest->name);
   if(rc != 0)
      return rc;

   if(lh_guest->building == rh_guest->building) {
      if(lh_guest->room == rh_guest->room)
           return 0;
      else {
         if(lh_guest->room < rh_guest->room)
            return -1;
         else
            return 1;
      }
   }
   else {
      if(lh_guest->building < rh_guest->building)
         return -1;
      else
         return 1;
   }
}

Setting up the container with two indexes would look something like this:

netsnmp_container *
netsnmp_container_init(void)
{
    netsnmp_container *container1, *container2;

    /*
     * create 2 containers.
     */
    container1 = netsnmp_container_find("guest room:table_container");
    if (NULL == container1)
        return NULL;
    container1->container_name = strdup("room container");

    container2 = netsnmp_container_find("guest name:table_container");
    if (NULL == container2) {
        CONTAINER_FREE(container1);
        return NULL;
    }
    container2->container_name = strdup("guest container");
    container2->compare = (netsnmp_container_compare*)_compare_name;

    netsnmp_container_add_index(container1, container2);

    return container1;
}

Sub-sets

Sometimes, it can be useful to access a sub-set of a data set. For example, if you have a container of all the IP addresses for some system, it might be useful to be able to work with only the IPv4 addresses, without having to iterate over all the addresses and ignore the IPv6 (or other) addresses. This can be done with a secondary index with a filter (only avaliable in more recent releases).

Container Operations

• CONTAINER_INSERT
• CONTAINER_REMOVE
• CONTAINER_CLEAR
• CONTAINER_FREE