Template:FAQ:Coding 05
From Net-SNMP Wiki
Revision as of 19:36, 20 July 2009 by Dts12 (Talk | contribs) (Latest FAQ revision - preparing for 5.5 release)
This is most likely the same problem as the previous entry. mib2c
takes the name of a MIB object, not the name of a file (or a MIB
module). Try using the name of the MODULE-IDENTITY
definition.
Another possibility is that the MIB may contain syntax errors.
Try running it through 'snmptranslate' or a dedicated SMI
validation tool (such as 'smilint' or the on-line interface at
http://wwwsnmp.cs.utwente.nl/ietf/mibs/validate/)
